Carlo Gavazzi RGC1P DIN Rail Power Controller Solid State/AC 250V Analogue

Bekijk alle Temperature Controllers

Subtotaal (1 eenheid)*

€ 304,69

(excl. BTW)

€ 368,67

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 9 stuk(s) klaar voor verzending
  • 13 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 304,69

*prijsindicatie

RS-stocknr.:
125-0690
Artikelnummer Distrelec:
300-76-698
Fabrikantnummer:
RGC1P23V42ED
Fabrikant:
Carlo Gavazzi
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Carlo Gavazzi

Product Type

Power Controller

Output Type

Solid State/AC

Maximum Current

63A

Maximum Operating Temperature

70°C

Minimum Operating Temperature

-40°C

Terminal Type

Screw

Control Type

Analogue

Maximum Supply Voltage

250V

Firing Mode

Phase Angle, 16x Full Cycle, 1x Full Cycle, Soft Starting, Advanced Full Cycle, 4x Full Cycle

Display Type

LED

Maximum Voltage

1200V

Standards/Approvals

EN 60947-4-3, RoHS (2011/65/EU), EN50155, EN61373, UL508, cUL (CSA 22.2 No.14-13)

Length

35.8mm

Width

103.5 mm

IP Rating

IP20

Input Type

Analogue

Mount Type

DIN Rail

Series

RGC1P

Panel Depth

99mm

Land van herkomst:
MT

RGC1P Series SSR Power Controllers


The RGC1P series of power controllers are supplied with integrated heatsink and are used to control output power of single phase loads with an analogue control input. Switching modes are selectable using a knob on the front of the controller and allows phase angle control, full cycle control, advanced full cycle control and soft starting.

The output of the RGC1P power controllers is protected against overvoltages by an integrated varistor across the output.

Features and Benefits


• 1-pole analogue switching AC solid-state contactors

• Integrated heatsink

• Selectable modes of operation;

- Phase angle

- Full cycle x1, x4 or x16

- Advanced full cycle specific for short wave infrared heaters

- Soft starting for limiting inrush current of loads having a high temperature coefficient

• Rated operational voltage up to 660 V ac

• Rated operation current up to 63 A ac

• Control inputs: 4-20 mA, 0-5 V, 1-5 V, 0-10 V, external potentiometer

• Integrated varistor protection on output

• 2 Front LEDs indicate status of load and control

• 100 kA short circuit current rating according to UL508

• DIN Rail or panel mounting

Gerelateerde Links