Jumo 701170 Panel Mount Controller 1 Input 240V ac Controller
- RS-stocknr.:
- 279-055
- Fabrikantnummer:
- 701170/8-0153-1001-23/005,000
- Fabrikant:
- Jumo
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
Per stuk
€ 510,59
(excl. BTW)
€ 617,81
(incl. BTW)
- RS-stocknr.:
- 279-055
- Fabrikantnummer:
- 701170/8-0153-1001-23/005,000
- Fabrikant:
- Jumo
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Jumo | |
| Product Type | Controller | |
| Number of Inputs | 1 | |
| Maximum Current | 20mA | |
| Maximum Operating Temperature | 55°C | |
| Minimum Operating Temperature | 0°C | |
| Terminal Type | Plug-in Screw Terminal | |
| Control Type | Controller | |
| Maximum Supply Voltage | 240V ac | |
| Maximum Voltage | 400V | |
| Display Type | LED | |
| IP Rating | IP65, IP20 | |
| Standards/Approvals | DIN EN 14597, DIN EN 60529, DIN EN 60730-2-9, DIN EN 61326 | |
| Series | 701170 | |
| Input Type | Analogue | |
| Mount Type | Panel Mount | |
| Alles selecteren | ||
|---|---|---|
Merk Jumo | ||
Product Type Controller | ||
Number of Inputs 1 | ||
Maximum Current 20mA | ||
Maximum Operating Temperature 55°C | ||
Minimum Operating Temperature 0°C | ||
Terminal Type Plug-in Screw Terminal | ||
Control Type Controller | ||
Maximum Supply Voltage 240V ac | ||
Maximum Voltage 400V | ||
Display Type LED | ||
IP Rating IP65, IP20 | ||
Standards/Approvals DIN EN 14597, DIN EN 60529, DIN EN 60730-2-9, DIN EN 61326 | ||
Series 701170 | ||
Input Type Analogue | ||
Mount Type Panel Mount | ||
- Land van herkomst:
- DE
The Jumo Freely Programmable Temperature Limiter according to DIN EN 14597 in format 48 x 96 mm is made for a voltage supply range of AC 110 to 240 V, 48 to 63 Hz, 5 VA. The measurement input is freely configurable for RTD temperature probe, thermocouples, current and voltage signal. The available analogue output provides a standards signal. Temperature limiter, -monitor watch thermal processes in systems on a set limit value. If this exceed, the integrated relay (with fuse cut-out) switch the system into a safe operating status. When the system gets back to the valid range, on the temperature limiter operation the button Reset needs to be pressed. Configured as an temperature monitor it reset on it's own. The relay KV with a adjustable temperature dispense a pre-alarm signal before the set limit value is archieved. The device is designed for the panel mounting and is wired with pluggable screw terminal with a conductor cross section of max. 2.5 mm².
Green LED OK expire and the LED K1 lights red
Switching status is also shown on the LED KV
Gerelateerde Links
- Jumo 701170 Panel Mount Controller, 96 x 48mm 1 Input, 110 → 240 V ac Supply Voltage Controller
- Jumo 701170 Panel Mount Controller, 96 x 48mm 1 Input 4, 20 → 30 V dc Supply Voltage Controller
- Jumo TB/TW 08 Temperature Limiter, 96 x 48mm 1 Input, 2 Output Relay, 110 → 240 V ac Supply Voltage
- Jumo TB/TW 08 Temperature Limiter, 96 x 48mm 1 Input, 3 Output Analogue, 110 → 240 V ac Supply Voltage
- Jumo TB/TW 08 Temperature Limiter, 96 x 48mm 1 Input, 2 Output 2 Relay, 20 → 30 V ac/dc Supply Voltage
- Jumo 202551 Surface Mount Controller, 96 x 48mm 4 Input Relay Controller
- Jumo diraTRON Panel Mount PID Temperature Controller, 96 x 48mm 3 Input, 3 Output 2 Relay, 1 Logic, 110 → 240 V
- Jumo 703046 Panel Mount Controller, 51 x 48mm 4 Input, 110 → 240 V ac Supply Voltage Controller