Siemens RDJ Wall Mount Thermostat, 1 Output Relay 3V dc PID Controller

RS-stocknr.:: 245-178
Fabrikantnummer:: RDJ100RF/SET / S55770-T380
Fabrikant:: Siemens

Siemens RDJ Wall Mount Thermostat, 1 Output Relay 3V dc PID Controller

Subtotaal (1 eenheid)*

€ 166,07

(excl. BTW)

€ 200,94

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

Plus verzending 1 stuk(s) vanaf 13 juli 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 166,07

*prijsindicatie

RS-stocknr.:: 245-178
Fabrikantnummer:: RDJ100RF/SET / S55770-T380
Fabrikant:: Siemens

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Siemens
	Output Type	Relay
	Product Type	Thermostat
	Number of Outputs	1
	Maximum Current	8A
	Minimum Operating Temperature	+5°C
	Maximum Operating Temperature	+30°C
	Control Type	PID Controller
	Terminal Type	Screw
	Maximum Supply Voltage	3V dc
	Display Type	LCD
	Maximum Voltage	250V ac
	IP Rating	IP20
	Standards/Approvals	CE, EAC, UKCA
	Series	RDJ
	Mount Type	Wall Mount

	Alles selecteren
	Merk Siemens
	Output Type Relay
	Product Type Thermostat
	Number of Outputs 1
	Maximum Current 8A
	Minimum Operating Temperature +5°C
	Maximum Operating Temperature +30°C
	Control Type PID Controller
	Terminal Type Screw
	Maximum Supply Voltage 3V dc
	Display Type LCD
	Maximum Voltage 250V ac
	IP Rating IP20
	Standards/Approvals CE, EAC, UKCA
	Series RDJ
	Mount Type Wall Mount

Datasheet - RDJ100RF/SET

Land van herkomst:: CN

Siemens RDJ Series Thermostat, IP20, Relay Output Type - RDJ100RF/SET / S55770-T380

This thermostat is a wall-mounted control device designed to regulate room temperature within a narrow operational range. It provides on/off switching via a single relay output and presents setpoint and status information on an LCD, making it suitable for building automation and equipment where simple, accurate temperature control is required.

Features and Benefits:

• Relay output rated for 8 A supporting mains switching
• Operates from low-voltage 3V DC supply for safe integration
• PID control algorithm enabling precise temperature regulation
• Screw-terminal connections allowing secure field wiring
• IP20 enclosure suited to protected indoor installations

Applications

• Suitable for HVAC zone temperature control in plant rooms
• Used for environmental control in electrical enclosures
• Ideal for integration with building automation panels
• Can be used for temperature regulation in industrial cabinetry

What temperature range can it control reliably?

It is intended to manage environments between +5 °C and +30 °C, matching typical indoor climate requirements.

How is the device mounted and connected on site?

It fits to a wall-mount position and uses screw terminals for the single output and supply connections, simplifying installation.

What standards approvals does it have for regulatory acceptance?

It carries CE, EAC and UKCA approvals indicating conformity with relevant regional requirements.

What operating temperatures will affect its performance limits?

The unit is specified for use up to a maximum ambient of +30 °C, with a lower operational limit of +5 °C.

What output and voltage constraints should installers note?

The relay output is capable of switching up to 250V AC at a maximum current of 8 A, and the control electronics operate from a 3V DC supply.