Eaton 50A British Standard Fuse, A3, 660V ac, 73mm

Bekijk alle Tag Fuses
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 19,70

(excl. BTW)

€ 23,84

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 3 stuk(s) klaar voor verzending
  • 63 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 120 stuk(s) vanaf 26 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 4€ 19,70
5 - 24€ 16,67
25 - 49€ 14,32
50 - 99€ 12,79
100 +€ 12,02

*prijsindicatie

RS-stocknr.:
415-216
Artikelnummer Distrelec:
303-99-360
Fabrikantnummer:
TIS50
Fabrikant:
Eaton
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Eaton

Current Rating

50A

Fuse Size

A3

Voltage Rating

660V ac

Fuse Standard

BS 88-2, IEC 269-2

Fixing Centres

73mm

Application Category

gG, gM

Tag Width

8.7mm

Fuse Speed

T

High Rupture Capacity

Yes

Overall Length

85.5mm

Body Diameter

22.2mm

Tag Type

Bolted

Tag Orientation

Offset

Body Height

56.4mm

Fuse Dimensions

22 x 86mm

Vrijgesteld

Eaton Bussmann Series Red Spot™ Range, Type 'T' HBC Fuses


The Red Spot range of offset slotted fuses (or bolted tag fuses) from Eaton Bussmann is specifically designed for the protection of general industrial applications such as power distribution, cable protection and motor protection. Available in BS88 British Standard fuse sizes from A1 to A4, offset slotted and bolted fuses are suitable for general purpose rating (gG) and dual motor rating (gM) motor protection types.

Features and Benefits


• 2 to 200 A rated current
• Breaking capacity 80 kA up to 690 V ac
• Type A1 rated up to 550 V ac/ 250 V dc
• Type A2 rated up to 660 V ac / 460 V dc
• General purpose (gG) and dual motor rated (gM) types
• Low power dissipation
• ASTA 20 certified

As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A.

Eaton British Standard Fuse, A3, 50A TIS50


This low-voltage industrial fuse from Eaton's Red Spot range is used to provide protection to electrical circuits and improve safety for both operators and equipment.
Designed to be a sacrificial device, this component breaks the current flow to a circuit in the event of a short circuit or overload fault that could otherwise cause damage. The fuse can be used for both gG (general purpose) and gM (dual motor) protection and is a common feature of electrical wiring and switchgear systems.

Features & Benefits


• T speed to accommodate harmless inrush currents without opening the fuse
• 8.7mm wide offset bolted brackets for easy attachment to fuse holders
• Current rating of 50A for use in heavy-duty applications
• High breaking capacity of 80kA to withstand high temperatures
• Weight of 58.2g, so won't add strain to equipment

How do I replace a blown fuse?


First, identify where the outage has occurred, then unplug the equipment and turn off the power. It's important to know the specifications of the blown fuse so its equivalent can be used as a replacement. When you're sure of this, detach the fuse from its holder and insert the new one.

Note

Eaton formerly known as Bussmann

Gerelateerde Links