Infineon TLE94613ESXUMA1 System-On-Chip 24-Pin TSDSO-24

Bekijk alle System-On-Chips
Bulkkorting beschikbaar

Subtotaal (1 verpakking van 2 eenheden)*

€ 5,86

(excl. BTW)

€ 7,10

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 2.888 stuk(s) vanaf 27 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks
Per stuk
Per verpakking*
2 - 18€ 2,93€ 5,86
20 - 48€ 2,455€ 4,91
50 - 98€ 2,31€ 4,62
100 - 198€ 2,135€ 4,27
200 +€ 1,99€ 3,98

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
244-2898
Fabrikantnummer:
TLE94613ESXUMA1
Fabrikant:
Infineon
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Infineon

Product Type

System-On-Chip

Mount Type

Surface

Package Type

TSDSO-24

Pin Count

24

Interface Type

LIN, CAN

Minimum Supply Voltage

-0.3V

Maximum Supply Voltage

28V

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

150°C

Series

TLE9461-3ES

Standards/Approvals

ISO 11898-2:2016, RoHS

Length

8.65mm

Height

3.9mm

Automotive Standard

AEC-Q101, AEC-Q100

The Infineon TLE94613ESXUMA1 device is designed for various CAN automotive applications as main supply for the microcontroller and as interface for a CAN bus network including the CAN Partial Networking feature. To support these applications, the System Basis Chip (SBC) provides the main functions, such as a 5 V lowdropout voltage regulator (LDO) for e.g. a microcontroller supply, another 5 V low-dropout voltage regulator with off-board protection for e.g. sensor supply, a HS-CAN transceiver supporting CAN FD and CAN Partial Networking (incl. FD tolerant mode) for data transmission, a high-voltage GPIO with embedded protective functions and a 16-bit Serial Peripheral Interface (SPI) to control and monitor the device.

Fully compliant to “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications” Revision 1.3, 2012-05-04

Charge pump-Output for N-channel MOSFET reverse-polarity protection with integrated spread spectrum modulation feature for optimum EMC performance

Universal High-Voltage Wake Input for voltage level monitoring and wake detection

General Purpose High-Voltage In- and Output (GPIO) configurable as Fail Output, Wake Input, Low-Side switch or High-Side switch

HIgh-Voltage Measurement Function as alternate pin assignment

Fail Outputs for Fail-Safe signalization

Configurable wake-up sources

Reset Output & Interrupt Output

Gerelateerde Links