onsemi RSL10-SIP-001GEVB, Bluetooth System On Chip SOC for Bluetooth
- RS-stocknr.:
- 185-8166
- Fabrikantnummer:
- RSL10-SIP-001GEVB
- Fabrikant:
- onsemi
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 185-8166
- Fabrikantnummer:
- RSL10-SIP-001GEVB
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Application | Bluetooth | |
| Technology | Bluetooth | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Application Bluetooth | ||
Technology Bluetooth | ||
With an Arduino-compliant form factor and on-board J-Link adaptor, the RSl10 SIP development board is used to effortlessly develop Bluetooth® low energy applications based on the RSL10 System-in-Package (SiP).
Integrated antenna (included as part of the RSL10 SIP)
Onboard 4-bit level translator to translate the LPDSP32 debug interface at low voltage to a 3.3 V JTAG debugger
Access to all RSL10 SIP peripherals via standard 0.1" headers
Alternate on-board SWJ−DP (serial-wire and/or JTAG) interface for Arm® Cortex®−M3 processor debugging
On-board J-link adaptor provides a SWJ−DP (serial-wire and/or JTAG) interface that enables you to debug the board using a USB connection to the PC
Compliance with the Arduino form factor
Onboard 4-bit level translator to translate the LPDSP32 debug interface at low voltage to a 3.3 V JTAG debugger
Access to all RSL10 SIP peripherals via standard 0.1" headers
Alternate on-board SWJ−DP (serial-wire and/or JTAG) interface for Arm® Cortex®−M3 processor debugging
On-board J-link adaptor provides a SWJ−DP (serial-wire and/or JTAG) interface that enables you to debug the board using a USB connection to the PC
Compliance with the Arduino form factor