Recom DC-DC Switching Regulator, Surface Mount, 5V dc Output Voltage, 4.5 → 5.5V dc Input Voltage, 200mA Output

R1Z series 1W single output, SMD, regulated DC-DC converters designed for isolating or converting DC power rails where an SMD format with regulated output is required.

Miniature design
Regulated
UL94V-0 package material
High temperature operation
Toroidal Magnetics
No load power consumption: 217mW typically

MTBF to MIL-HDBK 217F
Power derates above 85°C

EN-60950-1

Adjust the voltage level of your DC-powered devices using this DC-DC Switching Regulator from RECOM. It works by regulating the input voltage supply between 4.5 and 5.5V DC to a safe output voltage level of 5V DC for your low-voltage equipment. A mean time between failures of 2,387,000 hours means you can use this component for a long time with minimal risk of breakdowns. Its surface mounting design lets you directly attach it to a board with ease. Thanks to a wide operating temperature range between -40°C and +70°C, the unit can withstand demanding conditions.

• Integral short-circuit protection helps prevent damage from electrical malfunction
• Output current of 200mA for use in low-power devices
• Light weight of 1.6g for reduced strain on your board
• Low ripple and noise of 100mV Pk-Pk for clear signal transmission

• Digital cameras
• Gaming hardware
• Control systems
• Audio-visual devices

This switching regulator has an output voltage accuracy rating of ±2%, so you can rest assured that it delivers reliable voltage conversions.