SKF 17 Tooth Rough Stock Bore Sprocket, PHS 40-1BH17 40-1

RS-stocknr.:: 267-9565
Fabrikantnummer:: PHS 40-1BH17
Fabrikant:: SKF

SKF 17 Tooth Rough Stock Bore Sprocket, PHS 40-1BH17 40-1

Bekijk alle Sprockets

Subtotaal (1 eenheid)*

€ 5,75

(excl. BTW)

€ 6,96

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

4 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 5,75

*prijsindicatie

RS-stocknr.:: 267-9565
Fabrikantnummer:: PHS 40-1BH17
Fabrikant:: SKF

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SKF
	Bore Diameter	36.58mm
	Number of Teeth	17
	Product Type	Sprocket
	Bore Type	Rough Stock Bore
	Pitch Diameter	12.7mm
	Hub Diameter	54.1mm
	Material	Steel
	Sprocket Width	25.4mm
	Maximum Inside Diameter	36.58mm
	Acceptable Chain Type	40-1
	Outside Diameter	75.69mm
	Standards/Approvals	ANSI

	Alles selecteren
	Merk SKF
	Bore Diameter 36.58mm
	Number of Teeth 17
	Product Type Sprocket
	Bore Type Rough Stock Bore
	Pitch Diameter 12.7mm
	Hub Diameter 54.1mm
	Material Steel
	Sprocket Width 25.4mm
	Maximum Inside Diameter 36.58mm
	Acceptable Chain Type 40-1
	Outside Diameter 75.69mm
	Standards/Approvals ANSI

Datasheet - PHS 40-1BH17

Land van herkomst:: CN

SKF Sprocket, 17 Teeth, 75.69mm Outside Diameter - PHS 40-1BH17

This sprocket is a steel-hubbed component designed to transmit rotary motion in chain-driven systems, configured with a rough stock bore for on-site machining. It interfaces with a 40-1 roller chain and is intended for industrial power transmission where a hubbed sprocket with a substantial hub diameter is required.

Features and Benefits:

• 17 teeth provide consistent engagement with chain links for steady drive
• ANSI approval ensures compatibility with recognised chain standards
• Steel construction offers structural strength for continuous operation
• Rough stock bore permits customisation to shaft dimensions on site
• 25.4mm width supports lateral load distribution in chain runs

Applications

• Suitable for replacing worn sprockets in 40-1 chain drives
• Used with industrial conveyors requiring hubbed sprockets
• Ideal for retrofit projects needing a rough bore for machining
• Can be used for light-to-moderate power transmission systems
• Used for workshop fabrication where bore adaptation is needed

What bore arrangement allows shaft adaptation?

The component is supplied with a rough stock bore enabling machined finishing to match the shaft diameter precisely.

How does the hub design affect installation?

The hub diameter of 54.1mm provides a solid mounting area for set screws or press-fit arrangements depending on installation practice.

What internal clearance limits should be considered?

The maximum inside diameter is 36.58mm which defines the largest shaft or hub component that can be accommodated before machining.

Which chain type will this engage with?

It is intended for use with 40-1 roller chain, ensuring correct pitch and link engagement.

What dimensional parameter governs sprocket-to-chain spacing?

The pitch diameter of 12.7mm determines the effective sprocket spacing for accurate chain meshing.