TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 10 AWG

Bekijk alle Splice Connectors

Subtotaal (1 zak van 1000 eenheden)*

€ 628,96

(excl. BTW)

€ 761,04

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending 21 stuk(s) vanaf 10 juni 2026
  • Plus verzending 28 stuk(s) vanaf 17 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Zak(ken)
Per Zak
Per stuk*
1 +€ 628,96€ 0,629

*prijsindicatie

RS-stocknr.:
164-8972
Fabrikantnummer:
967398-000
Fabrikant:
TE Connectivity
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

TE Connectivity

Product Type

Splice Connector

Splice Type

Butt

Minimum Wire Size AWG

26AWG

Diameter

3.7mm

Insulation

Insulated

Maximum Wire Size AWG

10AWG

Colour

Red

Insulation Material

Nylon

Series

DuraSeal

Contact Material

Copper

Contact Plating

Tin

Termination Type

Crimp

Standards/Approvals

No

Splices


Red 0.25 - 1.6 mm²

Blue 1.0 - 2.6 mm²

Yellow 2.7 - 6.6 mm²

Duraseal Heatshrinkable


TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important

• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Gerelateerde Links