Onlangs gezocht

    DFRobot LattePanda (without Licence)

    RS-stocknr.:
    126-3118
    Fabrikantnummer:
    DFR0444
    Fabrikant:
    DFRobot
    DFRobot
    Bekijk alle Single Board Computers
    47 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    312 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    114,23 €

    (excl. BTW)

    138,22 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 1114,23 €
    2 - 4107,38 €
    5 +106,81 €
    RS-stocknr.:
    126-3118
    Fabrikantnummer:
    DFR0444
    Fabrikant:
    DFRobot
    Land van herkomst:
    CN

    Wetgeving en conformiteit

    Land van herkomst:
    CN

    Productomschrijving

    LattePanda 2GB/32GB SBC


    This is the LattePanda 2G/32G version from DFRobot, with the Intel Atom X5-Z8300 processor. It is a Windows 10 Single-Board Computer (SBC) capable of functioning as a full PC, plus plenty of software and hardware projects.

    How to use LattePanda as a PC:
    Simply add your keeyboard, mouse and HDMI or DVI-D input monitor. Alternatively, you can install Virtual Network Computing (VNC) software on the LattePanda and drive it remotely from another PC on the network. RS 124-4684 comes pre-installed with full Windows 10 Home Edition too.

    What else can it do?
    The LattePanda can also function as an embedded controller able to take inputs from sensors and drive motors and relays. For this purpose, a second processor chip is included: an ATmega32U4 which can be programmed as if it were an Arduino Leonardo. Most of the board's inputs and outputs are driven by this Arduino processor.


    Versions Available:


    (124-4684) - LattePanda with full Windows 10 License
    (126-3118) - LattePanda without license


    What’s on board?


    Processor: Intel Atom X5-Z8300
    Frequency: 1.8GHz
    Operating System: Windows 10 Home Edition (124-4684)
    Memory: 2GB DDR3L RAM & 32GB eMMC Flash
    SD Card: micro SD card slot
    GPU: Intel HD Graphics, 12 EUs @200-500Mhz, single-channel memory
    USB: 1 x USB 3.0, 2 x USB 2.0
    Power: microUSB connector
    WiFi: 802.11n 2.4G
    Bluetooth: Bluetooth 4.0
    Co-processor: Arduino Leonardo ATmega32u4
    Video: HDMI and MIPI-DSI
    Ethernet: 100Mbps LAN connector
    GPIO: 6 (Intel Processor), 20 (ATmega Processor)
    Other Connectors: Gravity Interface Connectors x 6, Onboard touch panel
    Voltage: 5V@2A
    Dimensions: 88 x 70mm / 3.46 x 2.76"


    How about some accessories?


    126-3116 FIT0477 Colour 7in WSVGA LCD Display Panel

    126-3115 FIT0506 Heatsink Kit

    126-3113 FIT0504 Cooling Fan Kit

    126-3114 KIT0112 Gravity Starter Sensor Module Kit


    Note

    When heavily loaded running a complex game program on all four cores, the LattePanda may overheat to the point where it has to protect itself by 'throttling back' the processor clock. This becomes obvious when fast moving graphics become slow and jerky. If this happens, then an additional heatsink kit or a fan is available (See above). These can be mounted on the perforated metal shield on the underside of the board. The fan is plugged into the CN2 header.

    Supplied with

    WiFi antenna


    DFRobot


    Specificaties

    KenmerkWaarde
    Product NameLattePanda (without Licence)
    47 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    312 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    114,23 €

    (excl. BTW)

    138,22 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 1114,23 €
    2 - 4107,38 €
    5 +106,81 €