Phoenix Contact MINI MCR Series Signal Conditioner, Current Input, Current Output, 18V Supply, ATEX

Bekijk alle Signal Conditioners

Subtotaal (1 eenheid)*

€ 201,27

(excl. BTW)

€ 243,54

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 2 stuk(s) klaar voor verzending
  • 1 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 201,27

*prijsindicatie

RS-stocknr.:
489-2847
Fabrikantnummer:
2864419
Fabrikant:
Phoenix Contact
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Phoenix Contact

Module Type

Loop Powered Isolator

Input Signal Type

Current

Output Signal Type

Current

Input Range

0 → 20mA

Output Range

0 → 20mA

Supply Voltage

18V

Hazardous Area Certification

ATEX

Mounting Type

DIN Rail Mount

Operating Temperature Range

-20 → +65°C

Series

MINI MCR

Signal Conditioner Function

Isolation Amplifier

Maximum Operating Temperature

+65°C

Minimum Operating Temperature

-20°C

Standards Met

CE

Number of Channels

1

Land van herkomst:
DE

Passive 4-20mA Loop Isolator


The 2864655 from Phoenix Contact is a 2-channel, loop powered passive isolator. This module is designed to electrically isolate current signals without an auxiliary power. Phoenix's 2864655 doesn't require any additional auxiliary voltage and has a voltage drop of just 1.7V. Not to mention, this module has 2 channels and a very slim 6.2 mm width housing. It has an ATEX zone-2 (potentially explosive areas) installation approval and is easily mounted on a DIN rail.
The 2864655 can isolate and filter standard current signals from 0mA up to 20 mA.

Features and benefits:


  • 2 channels on a housing of only 6.2 mm

  • No need for any additional auxiliary voltage

  • Voltage drop at isolating amplifier of just 1.7 V

  • Supplied by an input loop

  • ATEX rating allowing for installation in zone 2 areas (potentially explosive areas)

  • Mounted on either TBUS connector or straight onto DIN rail

Phoenix Contact Signal Conditioner, Screw Connection, Loop-Powered Isolator - MINI MCR-SL-1CP-I-I - 2864419


Looking for a way to solve ground-loop problems? Take charge with this Phoenix Contact signal conditioner. It has built-in isolation that cuts noise between the elements of large electrical setups. As the input and output remain constant at 0 to 20m, it does this without compromising the current in your circuit.
The unit has an IP20 rating, meaning it's touch-proof and protected against tools larger than 12mm, so you can get on with maintenance safely. To save space on your DIN rail, it has compact dimensions of6.2 (W) x 93.1 (H) x 102.5mm (D) and you can mount it in any position. Components like this one are commonly used for circuit monitoring and industrial automation.

Features & Benefits


• 1.5kV AC test voltage for protection from electrical surges
• Easy compatibility with rigid and flexible conductors in a cross-section range between 0.2 and 2.5mm²
• Snaps onto a standard 35mm DIN rail to make set-up speedy
• Withstands temperatures between -20°C and +65°C, so it's suitable for use in challenging conditions
• Loop-powered type removes the need for an external energy source

Gerelateerde Links