Ruland Shaft Collar, One Piece, Clamp Screw, OD 24 mm OD, W 9mm, Aluminium
- RS-stocknr.:
- 174-7095
- Fabrikantnummer:
- OF-MCL-10-A
- Fabrikant:
- Ruland
Ontvang bulkkorting
Voeg 5 meer toe om 4% te besparen
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 15,36
(excl. BTW)
€ 18,59
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 06 januari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Bespaar |
|---|---|---|
| 1 - 4 | € 15,36 | - |
| 5 - 9 | € 14,73 | 4% |
| 10 - 24 | € 14,44 | 5% |
| 25 + | € 14,13 | 8% |
*prijsindicatie
- RS-stocknr.:
- 174-7095
- Fabrikantnummer:
- OF-MCL-10-A
- Fabrikant:
- Ruland
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Ruland | |
| Product Type | Shaft Collar | |
| Bore Diameter | 10mm | |
| One/Two Piece | One Piece | |
| Material | Aluminium | |
| Single/Double Wide | Single Wide | |
| Outside Diameter | 24mm | |
| Fastening | Clamp Screw | |
| Threaded Bore Size | M3 x 10 | |
| Width | 9mm | |
| Finish | Bright | |
| Series | OF-MCL | |
| Bore Type | Plain | |
| Standards/Approvals | DIN 912 12.9, REACH, RoHS3 | |
| Alles selecteren | ||
|---|---|---|
Merk Ruland | ||
Product Type Shaft Collar | ||
Bore Diameter 10mm | ||
One/Two Piece One Piece | ||
Material Aluminium | ||
Single/Double Wide Single Wide | ||
Outside Diameter 24mm | ||
Fastening Clamp Screw | ||
Threaded Bore Size M3 x 10 | ||
Width 9mm | ||
Finish Bright | ||
Series OF-MCL | ||
Bore Type Plain | ||
Standards/Approvals DIN 912 12.9, REACH, RoHS3 | ||
- Land van herkomst:
- US
Ruland OF-MCL-10-A is a one-piece shaft collar with 10mm bore, 24mm OD, and 9mm width. OF-MCL-10-A has OD flats and tapped holes for mounting shaft collars to each other or adjacent components. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. OF-MCL-10-A is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power.
Gerelateerde Links
- Ruland Shaft Collar, One Piece, Clamp, OD 18 mm OD, W 9mm, Steel
- Ruland Shaft Collar, One Piece, Clamp, OD 16 mm OD, W 9mm, Steel
- Ruland Shaft Collar, One Piece, Clamp, OD 24 mm OD, W 9mm, Steel
- Ruland Shaft Collar, One Piece, Clamp, OD 18 mm OD, W 9mm, Aluminium
- Ruland Shaft Collar, One Piece, Clamp, OD 24 mm OD, W 9mm, Aluminium
- Ruland Shaft Collar, One Piece, Clamp, OD 24 mm OD, W 9mm, Carbon Steel
- Ruland Shaft Collar, One Piece, Clamp, OD 18 mm OD, W 9mm, Carbon Steel
- Ruland Shaft Collar, One Piece, Clamp Screw, OD 18 mm OD, W 9mm, Aluminium
