Ruland Collar, One Piece, Clamp Screw, OD 42 mm OD, W 15mm, 1215 Carbon Steel
- RS-stocknr.:
- 605-018
- Fabrikantnummer:
- FHT-MCL-21-F
- Fabrikant:
- Ruland
Subtotaal (1 eenheid)*
€ 29,70
(excl. BTW)
€ 35,94
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 15 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 29,70 |
*prijsindicatie
- RS-stocknr.:
- 605-018
- Fabrikantnummer:
- FHT-MCL-21-F
- Fabrikant:
- Ruland
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Ruland | |
| Product Type | Collar | |
| Bore Diameter | 21mm | |
| One/Two Piece | One Piece | |
| Material | 1215 Carbon Steel | |
| Single/Double Wide | Single Wide | |
| Outside Diameter | 42mm | |
| Fastening | Clamp Screw | |
| Threaded Bore Size | M6 | |
| Width | 15mm | |
| Finish | Black Oxide | |
| Bore Type | Taper | |
| Series | FHT-MCL | |
| Standards/Approvals | RoHS and REACH DIN 91 1.9 | |
| Alles selecteren | ||
|---|---|---|
Merk Ruland | ||
Product Type Collar | ||
Bore Diameter 21mm | ||
One/Two Piece One Piece | ||
Material 1215 Carbon Steel | ||
Single/Double Wide Single Wide | ||
Outside Diameter 42mm | ||
Fastening Clamp Screw | ||
Threaded Bore Size M6 | ||
Width 15mm | ||
Finish Black Oxide | ||
Bore Type Taper | ||
Series FHT-MCL | ||
Standards/Approvals RoHS and REACH DIN 91 1.9 | ||
- Land van herkomst:
- US
The Ruland One piece shaft collar has tapped holes for mounting shaft collars to sprockets, pulleys, metallic plates, or other components. Tapped holes allow for a secure connection between the shaft collar and mated component. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings.
RoHS3 and REACH compliant
Forged screws test beyond DIN 912 12.9 standards
Machined from solid bar stock to a fine burr free finish
Gerelateerde Links
- Ruland Collar, One Piece, Clamp Screw, OD 42 mm OD, W 15mm, 1215 Carbon Steel
- Ruland Collar, One Piece, Clamp, OD 60 mm OD, W 15mm, 1215 Carbon Steel
- Ruland Collar, One Piece, Clamp Screw, OD 48 mm OD, W 15mm, 1215 Carbon Steel
- Ruland Collar, One Piece, Clamp Screw, OD 40 mm OD, W 15mm, 1215 Carbon Steel
- Ruland Collar, One Piece, Clamp Screw, OD 57 mm OD, W 15mm, 1215 Carbon Steel
- Ruland Collar, One Piece, Clamp Screw, OD 60 mm OD, W 15mm, 1215 Carbon Steel
- Ruland Collar, One Piece, Clamp Screw, OD 54 mm OD, W 15mm, 1215 Carbon Steel
- Ruland Collar, One Piece, Clamp Screw, OD 45 mm OD, W 15mm, 1215 Carbon Steel