Ruland Collar, One Piece, Clamp Screw, OD 36 mm OD, W 13mm, Anodised Aluminium
- RS-stocknr.:
- 604-682
- Fabrikantnummer:
- FHT-MCL-17-AN
- Fabrikant:
- Ruland
Subtotaal (1 eenheid)*
€ 61,04
(excl. BTW)
€ 73,86
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 05 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 61,04 |
*prijsindicatie
- RS-stocknr.:
- 604-682
- Fabrikantnummer:
- FHT-MCL-17-AN
- Fabrikant:
- Ruland
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Ruland | |
| Product Type | Collar | |
| Bore Diameter | 17mm | |
| One/Two Piece | One Piece | |
| Material | Anodised Aluminium | |
| Single/Double Wide | Single Wide | |
| Outside Diameter | 36mm | |
| Fastening | Clamp Screw | |
| Threaded Bore Size | M5 | |
| Width | 13mm | |
| Finish | Anodised | |
| Series | FHT-MCL | |
| Standards/Approvals | RoHs and Reach, MILA865 Type II Class, DIN 91 1.9, ASTM B580 Type B | |
| Bore Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Ruland | ||
Product Type Collar | ||
Bore Diameter 17mm | ||
One/Two Piece One Piece | ||
Material Anodised Aluminium | ||
Single/Double Wide Single Wide | ||
Outside Diameter 36mm | ||
Fastening Clamp Screw | ||
Threaded Bore Size M5 | ||
Width 13mm | ||
Finish Anodised | ||
Series FHT-MCL | ||
Standards/Approvals RoHs and Reach, MILA865 Type II Class, DIN 91 1.9, ASTM B580 Type B | ||
Bore Type Taper | ||
- Land van herkomst:
- US
The Ruland One piece shaft collar has tapped holes for mounting shaft collars to sprockets, pulleys, metallic plates, or other components. Tapped holes allow for a secure connection between the shaft collar and mated component. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings.
RoHS3 and REACH compliant
Forged screws test beyond DIN 912 12.9 standards
Machined from solid bar stock to a fine burr free finish
Gerelateerde Links
- Ruland Collar, One Piece, Clamp Screw, OD 36 mm OD, W 13mm, Anodised Aluminium
- Ruland Collar, One Piece, Clamp, OD 34 mm OD, W 13mm, Anodised Aluminium
- Ruland Collar, One Piece, Clamp Screw, OD 34 mm OD, W 13mm, Anodised Aluminium
- Ruland Collar, One Piece, Quick Clamp, OD 34 mm OD, W 13mm, Anodised Aluminium
- Ruland Collar, One Piece, Clamp, OD 45 mm OD, W 15mm, Anodised Aluminium
- Ruland Collar, One Piece, Clamp, OD 57 mm OD, W 15mm, Anodised Aluminium
- Ruland Collar, One Piece, Clamp, OD 40 mm OD, W 15mm, Anodised Aluminium
- Ruland Collar, One Piece, Clamp, OD 60 mm OD, W 15mm, Anodised Aluminium