Schneider Electric 220 V dc 50 W Servo Motor, 5000 rpm, 0.16 Nm Max Output Torque, 8mm Shaft Diameter
- RS-stocknr.:
- 248-3947
- Fabrikantnummer:
- BCH2MBA530CA5C
- Fabrikant:
- Schneider Electric
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 248-3947
- Fabrikantnummer:
- BCH2MBA530CA5C
- Fabrikant:
- Schneider Electric
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Schneider Electric | |
| Maximum Output Torque | 0.16 Nm | |
| Supply Voltage | 220 V dc | |
| Output Speed | 5000 rpm | |
| Power Rating | 50 W | |
| Shaft Diameter | 8mm | |
| Alles selecteren | ||
|---|---|---|
Merk Schneider Electric | ||
Maximum Output Torque 0.16 Nm | ||
Supply Voltage 220 V dc | ||
Output Speed 5000 rpm | ||
Power Rating 50 W | ||
Shaft Diameter 8mm | ||
- Land van herkomst:
- CN
The Schneider Electric servo motor BCH has three and single phase motor and standard measurement device is a 20-bit single-turn absolute encoder integrated in BCH2 servo motors. This measurement device is particularly suited to the Lexium 28 range of servo drives. It offer continuous stall torque range from 0.16 Nm with nominal speed 5000 RPM.
IP degree of protection IP54, IP50
Ambient air temperature for operation -20 to 40 °C
Ambient air temperature for operation -20 to 40 °C