MikroElektronika Development Board Development Board for PIC18F47K42 EASYPIC V8

EasyPIC v8 covering a wide range of 8-bit PIC MCUs, from the smallest PIC MCU devices with only 8 pins, all the way up to 40-pin “giants”.

Board comes with PIC18F47K42 and 8MHz Crystal oscillator.

Eight different DIP sockets

Ranging from DIP8 up to DIP40, all DIP sockets allows exclusively placement of MCUs, from the smallest to the largest one. Only a single MCU can be installed into the development board at a time.

Improved quality and design

Surface mounted technology standard enables a sturdy, compact design with improved quality of the sockets and ergonomic design, which allows comfortable project development.

Two display connectors

The EasyPIC v8 development board is equipped with two display connectors, one is a 1x16pin header used for connecting LCD in 4-bit mode.

The second is a single row 20-pin header, which supports monochromatic GLCD with the resolution of 128x64 pixels and EasyTFT Board capable of showing advanced graphical content.

Display graphical or textual content

Two display options allowing even the basic 8-bit PIC MCU devices to utilize them and display graphical or textual content.

One of them is the 2x16-character LCD module which requires minimal processing power from the host MCU for its operation. The other option is familiar GLCD based on the KS108 (or compatible) display driver, or if you want to upgrade your application EasyTFT is a perfect choice.

Resistive touch panel

EasyPIC v8 provides the required circuitry, allowing the resistive touch panel to be interfaced with the installed MCU.

Resistive touch panel is supported over two separate connectors: one 4-pin flat cable connector (FFC) and one 1x4-pin header.

Improved mikroBUS™ sockets

The EasyPIC v8 offers five improved mikroBUS™ sockets, where you can place any of the 650+ different Click boards™, adding the infinite amount of possibilities.

Ready-to-use Click boards™

With more than 650 Click boards™ available, they are the fastest-growing range of add-on-boards in the world, which are standardized by pinout and size.

They enhance rapid development and accelerate time to market. These ready-to-use boards require no additional hardware configuration.

Engineered to deliver the best performances for the used components, they save developers of testing and troubleshooting often associated with the prototyping phase.

Endless modularity

The ready-to-use Click boards™ are saving time and money by offering complete solutions of hardware and software, instead of developing them from scratch.

Choose one of hundreds of Click boards™ out of these categories: mixed signal, wireless connectivity, storage, interface, displays, human-machine interface, adapter, clock and timing, motor control, power management and audio & voice.