Pepperl + Fuchs G10 Series Connector Hood, 1 m

RS-stocknr.:: 126-3488
Fabrikantnummer:: VAZ-G10-TERM
Fabrikant:: Pepperl + Fuchs

Pepperl + Fuchs G10 Series Connector Hood, 1 m

Subtotaal (1 eenheid)*

€ 126,16

(excl. BTW)

€ 152,65

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Tijdelijk niet op voorraad

Verzending 10 stuk(s) vanaf 31 juli 2026
Plus verzending 15 stuk(s) vanaf 18 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 126,16

*prijsindicatie

RS-stocknr.:: 126-3488
Fabrikantnummer:: VAZ-G10-TERM
Fabrikant:: Pepperl + Fuchs

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Pepperl + Fuchs
	Product Type	Connector Hood
	Inlet Connection Type	Via Flat Cable
	Maximum Operating Voltage	31.6V
	Series	G10
	Housing Material	Polycarbonate, Polybutylene Terephthalate
	IP Rating	IP69K, IP68, IP67
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	Type 1 enclosure, IEC 62026-2:2006, EN 50295:1999, EN 60529:2000, EN 61000-6-2:2005, EMC 2004/108/EC, cULus, EN 61326-1:2006, UL File Number E223772, EN 61326:2006, EN 61000-6-4:2007
	Cable Length	1m
	Minimum Operating Voltage	18.5V
	Output Type	M12 Connector

	Alles selecteren
	Merk Pepperl + Fuchs
	Product Type Connector Hood
	Inlet Connection Type Via Flat Cable
	Maximum Operating Voltage 31.6V
	Series G10
	Housing Material Polycarbonate, Polybutylene Terephthalate
	IP Rating IP69K, IP68, IP67
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Standards/Approvals Type 1 enclosure, IEC 62026-2:2006, EN 50295:1999, EN 60529:2000, EN 61000-6-2:2005, EMC 2004/108/EC, cULus, EN 61326-1:2006, UL File Number E223772, EN 61326:2006, EN 61000-6-4:2007
	Cable Length 1m
	Minimum Operating Voltage 18.5V
	Output Type M12 Connector

Datasheet

Land van herkomst:: ID

Accessories

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.

A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).

By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.

The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.

Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring

High data speed

Low cost installation

Intelligent diagnostics

Easy to learn and install

Highly flexible

Can connect to other fieldbus systems

User-friendly

Off-site pre-assembly and test

Easy maintenance

Faster on-site commissioning

Host or stand alone use

Able to use standard sensors and actuators (using modules)