SKF Nitrile Rubber (NBR) Radial Shaft Seal, 70 mm ID, 90 mm OD, 12 mm

Subtotaal (1 verpakking van 10 eenheden)*

€ 35,85

(excl. BTW)

€ 43,38

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 40 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
10 +€ 3,585€ 35,85

*prijsindicatie

RS-stocknr.:
267-3837
Fabrikantnummer:
70X90X12 HMS5 RG
Fabrikant:
SKF
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SKF

Product Type

Radial Shaft Seal

Inside Diameter

70mm

Outside Diameter

90mm

Seal Type

Rotary Shaft Seal

Thickness

12mm

Seal Material

Nitrile Rubber (NBR)

Land van herkomst:
CN

SKF Radial Shaft Seal, 70mm Inside Diameter, 12mm Thickness - 70X90X12 HMS5 RG


This radial shaft seal provides a sealing solution for rotary shafts where a resilient contact element is required to retain lubricants and exclude contaminants during rotation. It is constructed from nitrile rubber and intended for use where a flexible elastomeric barrier is needed between rotating and stationary components.

Features and Benefits:


• Nitrile rubber composition resists common oils and greases
• Rotary design maintains continuous dynamic sealing under rotation
• 12mm section thickness supports sustained axial contact pressure
• Designed to fit 70mm internal shafts for secure seating
• Compatible with 90mm housing bores for straightforward installation

Applications


• Used with industrial motors requiring oil retention
• Suitable for gearbox shafts operating under moderate temperatures
• Ideal for pumps where rotating Seals prevent leakage
• Can be used for drive shafts in light machinery
• Used for maintenance replacement of worn shaft Seals

What material determines chemical compatibility?


The seal is formed from nitrile rubber which offers resistance to typical oils and greases.

Which shaft and bore sizes must match for correct fitment?


The internal diameter accepts 70mm shafts while the external diameter seats in 90mm bores.

How does the seal cope with axial loading at the shaft interface?


The 12mm section thickness provides the axial cross-section necessary to maintain sealing contact under axial loads.

Is the component suitable for dynamic rotary sealing applications?


Yes, the design is intended specifically for rotary shaft sealing during continuous rotation.

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.