SKF Nitrile Rubber (NBR) Radial Shaft Seal, 22 mm ID, 35 mm OD, 7 mm

Subtotaal (10 eenheden, in een pakket van 10)*

€ 12,96

(excl. BTW)

€ 15,68

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 10 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
10 +€ 1,296€ 12,96

*prijsindicatie

RS-stocknr.:
267-3670
Fabrikantnummer:
22X35X7 HMS5 RG
Fabrikant:
SKF
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SKF

Inside Diameter

22mm

Product Type

Radial Shaft Seal

Outside Diameter

35mm

Seal Type

Rotary Shaft Seal

Thickness

7mm

Seal Material

Nitrile Rubber (NBR)

Land van herkomst:
CN

SKF Radial Shaft Seal, 22mm Inside Diameter, 35mm Outside Diameter - 22X35X7 HMS5 RG


This radial shaft seal provides rotary sealing for shafts operating in dynamic conditions. It is designed to maintain contact with a rotating shaft to prevent fluid leakage and exclude contaminants, suitable for assembly where resilient sealing against oils is required.

Features and Benefits:


• Made from nitrile rubber to resist common oil-based fluids
• Maintains sealing contact during shaft rotation for leakage control
• Thin cross-section reduces axial space requirements in housings
• Robust material performance for extended operational cycles

Applications


• Suitable for machines using a 22mm shaft diameter
• Used with rotating assemblies requiring oil containment
• Ideal for maintenance replacement in Compact housings
• Can be used for repair of transmission or gearbox shafts

What material characteristic makes it suitable for oil environments?


The seal is manufactured from nitrile rubber which has compatibility with oil-based lubricants and provides elastic sealing behaviour.

How does the seal accommodate installation into a housing?


The seal's outer diameter is sized to fit a matching bore, allowing interference fit retention within the housing.

What shaft size does the seal accept?


It is specified for use on a 22mm shaft, matching the internal sealing lip to that diameter.

How thick is the sealing section relative to axial space constraints?


The component has a thickness of 7mm, which limits axial intrusion into the assembly.

What external bore size should the housing provide for correct fit?


The housing bore should correspond to the seal's external diameter of 35mm for proper seating.

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.