SKF Nitrile Rubber (NBR) Radial Shaft Seal, 32 mm ID, 52 mm OD, 7 mm

RS-stocknr.:: 267-3430
Fabrikantnummer:: 32X52X7 HMS5 RG
Fabrikant:: SKF

SKF Nitrile Rubber (NBR) Radial Shaft Seal, 32 mm ID, 52 mm OD, 7 mm

Bekijk alle Seals

Subtotaal (1 verpakking van 10 eenheden)*

€ 20,61

(excl. BTW)

€ 24,94

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

Plus verzending 20 stuk(s) vanaf 24 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
10 +	€ 2,061	€ 20,61

*prijsindicatie

RS-stocknr.:: 267-3430
Fabrikantnummer:: 32X52X7 HMS5 RG
Fabrikant:: SKF

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SKF
	Inside Diameter	32mm
	Product Type	Radial Shaft Seal
	Outside Diameter	52mm
	Seal Type	Rotary Shaft Seal
	Thickness	7mm
	Seal Material	Nitrile Rubber (NBR)

Datasheet - 32X52X7 HMS5 RG

Land van herkomst:: CN

SKF Radial Shaft Seal, 32mm Inside Diameter, 52mm Outside Diameter - 32X52X7 HMS5 RG

This radial shaft seal is designed to prevent fluid leakage and exclude contaminants in rotating shaft assemblies, operating as a sealing element around a rotating Interface to maintain system integrity in mechanical equipment.

Features and Benefits:

• Made from nitrile rubber to resist common oils and greases
• Rotary sealing design to maintain contact under shaft rotation
• 7 mm cross-section for Compact axial sealing profiles
• Ensures continuous sealing at operating speeds typical for rotary applications

Applications

• Suitable for sealing bearings in general mechanical equipment
• Used with gearboxes requiring oil retention
• Ideal for rotating pump shaft protection
• Can be used for maintenance replacement in industrial drives

What shaft size does it fit?

It fits shafts with a 32 mm inner diameter.

What external bore size is required?

It requires a 52 mm housing bore for correct installation.

What material properties affect chemical resistance?

The nitrile rubber composition governs resistance to oils and greases.

How thick is the sealing element across its section?

The seal has a thickness of 7 mm.

Is the design intended for rotary motion?

Yes, it is configured specifically for rotary shaft sealing applications.