SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 52 mm OD, 7 mm

Bekijk alle Seals

Subtotaal (1 verpakking van 10 eenheden)*

€ 16,38

(excl. BTW)

€ 19,82

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 70 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
10 +€ 1,638€ 16,38

*prijsindicatie

RS-stocknr.:
267-3389
Fabrikantnummer:
30X52X7 HMS5 RG
Fabrikant:
SKF
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SKF

Product Type

Seal

Seal Type

Rotary Shaft Seal

Thickness

7mm

Seal Material

Nitrile Rubber (NBR)

Land van herkomst:
CN

SKF Seal, 30mm Inside Diameter, 52mm Outside Diameter - 30X52X7 HMS5 RG


This seal is a rotary shaft sealing element designed to separate rotating and stationary components and retain oil or grease within assemblies. It features a rubber outer diameter and a single elastomeric sealing lip fitted with a garter spring to maintain radial contact, making it suitable for rotating shafts in industrial equipment.

Features & Benefits


• Nitrile rubber lip provides compatible resistance to oils and greases
• Garter spring maintains a consistent radial load during rotation
• Handles circumferential speed up to 5.77 m/s for moderate-speed shafts
• Operates between −40°C to 100°C for a broad temperature range
• Withstands short-term peaks to 120°C for transient thermal events

Applications


• Suitable for Seals in motors and pumps requiring oil retention
• Ideal for rotating shafts in automation equipment
• Used in gearboxes where grease containment is required
• Can be used for shaft interfaces in electrical actuators

What shaft sizes will this component accept?


It is engineered to fit a 30mm shaft diameter and locate in a 52mm housing bore with a 7mm axial width.

How does it cope with shaft misalignment or eccentricity?


The elastomer lip and flexible rubber outer diameter permit some misalignment accommodation while the spring preserves sealing contact.

What rotational speed limits should be observed?


Maximum recommended rotational speed is 3,660 r/min to avoid exceeding the stated circumferential speed limit.

Can it be used where slight pressure differentials exist?


It tolerates a nominal pressure differential of 0.03 N/mm across the seal interface.

Are any complementary items suggested for installation?


A thin protective sleeve, such as a Speedi-Sleeve, may be used where shaft wear or grooves are present to aid correct seating.

Gerelateerde Links