SKF Polyurethane Seal, 47.5 mm ID, 63 mm OD, 6.3 mm
- RS-stocknr.:
- 267-0495
- Fabrikantnummer:
- MPV-63X47.5X6.3
- Fabrikant:
- SKF
Subtotaal (1 verpakking van 10 eenheden)*
€ 87,06
(excl. BTW)
€ 105,34
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 10 stuk(s) vanaf 28 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 8,706 | € 87,06 |
*prijsindicatie
- RS-stocknr.:
- 267-0495
- Fabrikantnummer:
- MPV-63X47.5X6.3
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Seal | |
| Inside Diameter | 47.5mm | |
| Outside Diameter | 63mm | |
| Seal Type | Hydraulic Seal | |
| Thickness | 6.3mm | |
| Seal Material | Polyurethane | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Seal | ||
Inside Diameter 47.5mm | ||
Outside Diameter 63mm | ||
Seal Type Hydraulic Seal | ||
Thickness 6.3mm | ||
Seal Material Polyurethane | ||
Vrijgesteld
SKF Seal, 6.3mm Thickness, Polyurethane Seal - MPV-63X47.5X6.3
This seal is a hydraulic sealing component designed to contain fluid and prevent leakage within pressurised systems. It is manufactured from polyurethane and intended for use where a resilient elastomeric barrier is required between moving or stationary surfaces in hydraulic equipment.
Features and Benefits:
• Polyurethane construction provides high wear resistance for extended service life
• 6.3mm thickness offers robust compression stability under load
• Hydraulic sealing profile reduces fluid bypass during reciprocation
• Compatible with common hydraulic media for consistent performance
• 6.3mm thickness offers robust compression stability under load
• Hydraulic sealing profile reduces fluid bypass during reciprocation
• Compatible with common hydraulic media for consistent performance
Applications
• Suitable for rod sealing in hydraulic actuators
• Used with cylinder assemblies requiring resilient Seals
• Ideal for replacement of worn hydraulic Seals in maintenance
• Can be used for piston sealing where elastomeric contact is needed
• Used with cylinder assemblies requiring resilient Seals
• Ideal for replacement of worn hydraulic Seals in maintenance
• Can be used for piston sealing where elastomeric contact is needed
What material properties affect abrasion performance?
The polyurethane composition gives enhanced resistance to surface wear and maintains sealing contact under sliding motion.
How does thickness influence sealing behaviour?
The 6.3mm cross-section delivers dimensional stability and helps maintain sealing force under cyclical compression.
Which Interface dimensions determine fitment in a bore?
Fitment depends on the internal and external diameters which set radial clearance for installation.
How are inner and outer diameters used during installation?
The inner diameter locates on the shaft while the outer diameter engages the housing bore to form the seal.
Gerelateerde Links
- SKF Polyamide Seal, 47.5 mm ID, 63 mm OD, 6.3 mm
- SKF Polyurethane Seal, 59.5 mm ID, 75 mm OD, 6.3 mm
- SKF Polyurethane Seal, 49.5 mm ID, 65 mm OD, 6.3 mm
- SKF Polyurethane Seal, 44.5 mm ID, 60 mm OD, 6.3 mm
- SKF Polyurethane Seal, 39.5 mm ID, 55 mm OD, 6.3 mm
- SKF Polyurethane Seal, 34.5 mm ID, 50 mm OD, 6.3 mm
- SKF Polyurethane Seal, 54.5 mm ID, 70 mm OD, 6.3 mm
- SKF Polyurethane Seal, 139 mm ID, 160 mm OD, 8.1 mm