SKF Flouro Rubber Seal, 45 mm ID, 48 mm OD, 13 mm
- RS-stocknr.:
- 267-0297
- Fabrikantnummer:
- 50 VS V
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 21,13
(excl. BTW)
€ 25,57
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 5 stuk(s) vanaf 28 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 21,13 |
*prijsindicatie
- RS-stocknr.:
- 267-0297
- Fabrikantnummer:
- 50 VS V
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 45mm | |
| Product Type | Seal | |
| Outside Diameter | 48mm | |
| Seal Type | V Seal | |
| Thickness | 13mm | |
| Seal Material | Flouro Rubber | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 45mm | ||
Product Type Seal | ||
Outside Diameter 48mm | ||
Seal Type V Seal | ||
Thickness 13mm | ||
Seal Material Flouro Rubber | ||
- Land van herkomst:
- IT
SKF Seal, 13mm Thickness, 45mm Inside Diameter - 50 VS V
This seal is a V-shaped sealing element designed for dynamic shaft applications, providing fluid containment and exclusion in rotating assemblies. It is manufactured from a fluorine-based elastomer to perform in settings requiring resistance to aggressive media and elevated temperatures, and is intended to fit tightly within a V-groove profile for axial sealing.
Features and Benefits:
• Fluoro-rubber construction gives enhanced chemical resistance
• V-profile form reduces axial leakage in rotating shafts
• Designed for high-temperature service where heat tolerance is required
• Compressible lip geometry supports sustained sealing contact
• Low-friction material aids reduced wear during rotation
• V-profile form reduces axial leakage in rotating shafts
• Designed for high-temperature service where heat tolerance is required
• Compressible lip geometry supports sustained sealing contact
• Low-friction material aids reduced wear during rotation
Applications
• Suitable for sealing shafts in hydraulic equipment
• Ideal for use in pumps handling aggressive fluids
• Used with rotary shafts exposed to high temperatures
• Can be used for retrofitting V-groove seal assemblies
• Suitable for industrial machinery requiring chemical resistance
• Ideal for use in pumps handling aggressive fluids
• Used with rotary shafts exposed to high temperatures
• Can be used for retrofitting V-groove seal assemblies
• Suitable for industrial machinery requiring chemical resistance
What are the key material characteristics relevant to aggressive media?
The component is MADE from a fluorine-containing elastomer selected for resistance to a wide range of chemicals and fuels.
How does the seal manage heat during continuous operation?
The elastomer formulation is intended to withstand elevated service temperatures, maintaining elasticity and sealing contact under thermal stress.
What design aspect minimises leakage on rotating shafts?
The V-shaped cross-section allows axial lip engagement that compensates for shaft movement and maintains a fluid-tight interface.
How should the sealing element be positioned in the shaft assembly?
It should be installed into a matching V-groove so the lips compress against the shaft to form the sealing interface.
What operational behaviour affects wear rate?
Friction between the seal lips and the rotating surface determines wear, so lubrication and shaft finish will influence service life.
Gerelateerde Links
- SKF Flouro Rubber Seal, 40 mm ID, 43 mm OD, 13 mm
- SKF Flouro Rubber Seal, 54 mm ID, 58 mm OD, 13 mm
- SKF Flouro Rubber Seal, 36 mm ID, 38 mm OD, 13 mm
- SKF Nitrile Rubber (NBR) Seal, 45 mm ID, 48 mm OD, 13 mm
- SKF Flouro Rubber Seal, 72 mm ID, 78 mm OD, 15.5 mm
- SKF Flouro Rubber Seal, 67 mm ID, 73 mm OD, 15.5 mm
- SKF Flouro Rubber Seal, 63 mm ID, 68 mm OD, 15.5 mm
- SKF Flouro Rubber Seal, 27 mm ID, 29 mm OD, 10.5 mm