Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SKF
	Product Type	Radial Shaft Seal
	Inside Diameter	25mm
	Outside Diameter	46mm
	Seal Type	Rotary Shaft Seal
	Thickness	7mm
	Seal Material	Nitrile Rubber (NBR)

Datasheet - 25X46X7 HMSA10 RG

Land van herkomst:: CN

SKF Radial Shaft Seal, 25mm Inside Diameter, 46mm Outside Diameter - 25X46X7 HMSA10 RG

This radial shaft seal provides a rotating shaft sealing solution for oil and fluid retention in mechanical assemblies. It is designed to prevent leakage and contamination on shafts where a dynamic rotary Interface requires a resilient contact lip. The component is suitable for installations requiring a Compact cross-section and elastomeric compatibility with common lubricants.

Features and Benefits:

• Nitrile rubber material offers resistance to oil-based fluids
• Rotary lip design maintains continuous shaft contact
• 7mm section thickness delivers consistent axial sealing force
• 25mm inside diameter enables installation on small shafts
• 46mm outside diameter secures press-fit into housings

Applications

• Suitable for sealing drive shafts in small gearboxes
• Used with rotary actuators in industrial equipment
• Ideal for maintenance replacement on pump shafts
• Can be used for motor and gearbox output shafts
• Used for sealing rotating shafts in hydraulic components

What material compatibility does the seal provide?

The elastomer is nitrile rubber which performs well with mineral oils and many grease formulations.

How does the seal locate within a bore during assembly?

The outer diameter provides an interference fit so it sits firmly in the housing bore.

What shaft size must be used for correct installation?

The internal diameter requires a 25mm shaft for proper radial contact and sealing.

How thick is the sealing section that controls axial compression?

The seal has a 7mm thickness which determines its axial squeeze and lip load.

What housing bore dimension matches the external diameter?

The external diameter is 46mm for matching the receiving bore size.

SKF Nitrile Rubber (NBR) Radial Shaft Seal, 25 mm ID, 46 mm OD, 7 mm

GRATIS bezorging voor bestellingen vanaf € 90,00