SKF Nitrile Rubber (NBR) Radial Shaft Seal, 15 mm ID, 25 mm OD, 5 mm
- RS-stocknr.:
- 266-8938
- Fabrikantnummer:
- 15X25X5 HMS5 RG
- Fabrikant:
- SKF
Subtotaal (10 eenheden, in een pakket van 10)*
€ 11,06
(excl. BTW)
€ 13,38
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 230 stuk(s) vanaf 28 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 1,106 | € 11,06 |
*prijsindicatie
- RS-stocknr.:
- 266-8938
- Fabrikantnummer:
- 15X25X5 HMS5 RG
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Radial Shaft Seal | |
| Inside Diameter | 15mm | |
| Outside Diameter | 25mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 5mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Radial Shaft Seal | ||
Inside Diameter 15mm | ||
Outside Diameter 25mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 5mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Land van herkomst:
- CN
SKF Radial Shaft Seal, 15mm Inside Diameter, 25mm Outside Diameter - 15X25X5 HMS5 RG
This radial shaft seal provides a rotating-shaft sealing solution designed to prevent fluid escape and exclude contaminants in rotary assemblies. It is manufactured from nitrile rubber and is intended for installation where a compact, resilient sealing element is required around a spinning shaft.
Features and Benefits:
• Nitrile composition resists common petroleum-based fluids
• Rotary design maintains dynamic sealing under rotation
• Thin cross-section supports Compact housing integration
• Sealing lip geometry delivers consistent contact pressure
• Elastomeric flexibility reduces leakage during shaft misalignment
• Rotary design maintains dynamic sealing under rotation
• Thin cross-section supports Compact housing integration
• Sealing lip geometry delivers consistent contact pressure
• Elastomeric flexibility reduces leakage during shaft misalignment
Applications
• Suitable for small gearbox oil retention tasks
• Used with motor shafts in Compact electromechanical assemblies
• Ideal for pump drives requiring fluid containment
• Can be used for bearing protection against contaminants
• Used for rotary Seals in precision instrumentation
• Used with motor shafts in Compact electromechanical assemblies
• Ideal for pump drives requiring fluid containment
• Can be used for bearing protection against contaminants
• Used for rotary Seals in precision instrumentation
What material compatibility should be expected with common lubricants?
The elastomer is nitrile rubber which is compatible with many petroleum-based lubricants and oils.
How does the seal cope with minor shaft eccentricity during operation?
The flexible rubber construction absorbs small misalignments while maintaining lip contact to limit leakage.
What installation clearance considerations apply for the component?
A press-fit into the housing bore is typical, with radial interference chosen to retain the seal without deforming the sealing lip.
How does the seal behave during intermittent shaft rotation?
The rotary lip sustains repeated start/stop cycles by conforming to the shaft surface and preserving the sealing interface.
Gerelateerde Links
- SKF Nitrile Rubber (NBR) Seal, 15 mm ID, 25 mm OD, 5 mm
- SKF Nitrile Rubber (NBR) Seal, 240 mm ID, 270 mm OD, 15 mm
- SKF Nitrile Rubber (NBR) Seal, 230 mm ID, 260 mm OD, 15 mm
- SKF Nitrile Rubber (NBR) Seal, 15 mm ID, 32 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 140 mm ID, 170 mm OD, 15 mm
- SKF Nitrile Rubber (NBR) Seal, 210 mm ID, 240 mm OD, 15 mm
- SKF Nitrile Rubber (NBR) Seal, 175 mm ID, 200 mm OD, 15 mm
- SKF Nitrile Rubber (NBR) Seal, 220 mm ID, 250 mm OD, 15 mm
