Infineon 40 V 120 mA Rectifier & Schottky Diode Schottky 3-Pin SOT-143-4-1 BAS4007E6327HTSA1

RS-stocknr.:: 249-6978
Fabrikantnummer:: BAS4007E6327HTSA1
Fabrikant:: Infineon

Infineon 40 V 120 mA Rectifier & Schottky Diode Schottky 3-Pin SOT-143-4-1 BAS4007E6327HTSA1

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 rol van 3000 eenheden)*

€ 420,00

(excl. BTW)

€ 510,00

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Tijdelijk niet op voorraad

Verzending 18.000 stuk(s) vanaf 14 januari 2027
Plus verzending 21.000 stuk(s) vanaf 17 juni 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per rol*
3000 - 3000	€ 0,14	€ 420,00
6000 - 12000	€ 0,133	€ 399,00
15000 +	€ 0,125	€ 375,00

*prijsindicatie

RS-stocknr.:: 249-6978
Fabrikantnummer:: BAS4007E6327HTSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Mount Type	Surface
	Product Type	Rectifier & Schottky Diode
	Package Type	SOT-143-4-1
	Maximum Continuous Forward Current If	120mA
	Peak Reverse Repetitive Voltage Vrrm	40V
	Diode Configuration	Parallel Pair
	Series	BAS40
	Rectifier Type	Schottky
	Pin Count	3
	Peak Non-Repetitive Forward Surge Current Ifsm	200mA
	Peak Reverse Current Ir	1μA
	Minimum Operating Temperature	-55°C
	Maximum Forward Voltage Vf	1000mV
	Maximum Operating Temperature	150°C
	Standards/Approvals	RoHS
	Width	1mm
	Length	2.9mm
	Height	2.4mm
	Automotive Standard	AEC-Q101

	Alles selecteren
	Merk Infineon
	Mount Type Surface
	Product Type Rectifier & Schottky Diode
	Package Type SOT-143-4-1
	Maximum Continuous Forward Current If 120mA
	Peak Reverse Repetitive Voltage Vrrm 40V
	Diode Configuration Parallel Pair
	Series BAS40
	Rectifier Type Schottky
	Pin Count 3
	Peak Non-Repetitive Forward Surge Current Ifsm 200mA
	Peak Reverse Current Ir 1μA
	Minimum Operating Temperature -55°C
	Maximum Forward Voltage Vf 1000mV
	Maximum Operating Temperature 150°C
	Standards/Approvals RoHS
	Width 1mm
	Length 2.9mm
	Height 2.4mm
	Automotive Standard AEC-Q101

Datasheet - BAS4007E6327HTSA1

Infineon BAS40 Series Rectifier & Schottky Diode, 120mA Maximum Continuous Forward Current, 40V Peak Reverse Repetitive Voltage - BAS4007E6327HTSA1

This rectifier & schottky diode is a surface-mount dual-diode device designed for low-voltage rectification and fast switching in Compact electronic assemblies. It operates across a wide temperature range suitable for demanding environments and is presented in a small SOT-143-4-1 package for straightforward PCB integration.

Features and Benefits:

• Low forward voltage 1000mV reduces conduction losses
• Max continuous forward current 120mA supports small-signal loads
• Peak reverse repetitive voltage 40V enables moderate-voltage blocking
• Peak non-rep surge current 200mA tolerates transient events
• Peak reverse current 1μA minimises leakage under reverse bias
• Operates from -55°C to 150°C for high-temperature applications

Applications

• Suitable for power management in portable instruments
• Used for input protection in automotive sensing circuits
• Ideal for low-voltage rectification in DC-DC converters
• Can be used for signal demodulation in communication modules
• Used with Compact assemblies where surface mounting is required

What package facilitates automated assembly?

The device is supplied in a SOT-143-4-1 package compatible with surface-mount placement machines.

How does its diode configuration affect circuit design?

The component is configured as a parallel pair across three pins allowing dual-path rectification or redundancy within constrained footprints.

What environmental standards does it meet for industrial use?

It conforms to RoHS requirements and meets automotive stress specification AEC-Q101 for qualification under vehicle conditions.

How should designers account for surge events?

Designers should consider the 200mA Peak non-repetitive forward surge rating when specifying transient protection and ensure PCB tracks handle brief surges.