SKF NKI 15/16 15 mm ID Roller Bearing Needle, 27 mm OD

RS-stocknr.:: 209-2396
Fabrikantnummer:: NKI 15/16
Fabrikant:: SKF

SKF NKI 15/16 15 mm ID Roller Bearing Needle, 27 mm OD

Bekijk alle Roller Bearings

Subtotaal (1 eenheid)*

€ 27,41

(excl. BTW)

€ 33,17

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

Plus verzending 3 stuk(s) vanaf 04 mei 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 27,41

*prijsindicatie

RS-stocknr.:: 209-2396
Fabrikantnummer:: NKI 15/16
Fabrikant:: SKF

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SKF
	Product Type	Roller Bearing
	Inside Diameter	15mm
	Race Width	16mm
	Bore Type	Parallel
	Roller Material	Carbon Chrome Steel
	Cage Material	Sheet Metal
	Maximum Speed - Oil	20000rpm
	Maximum Speed - Grease	14000rpm
	Limiting Speed	24000rpm
	Standards/Approvals	No
	End Type	Open
	Dynamic Load Rating	13.4kN
	Outside Diameter	27mm
	Static Load Rating	19kN
	Bearing Material	Steel
	Internal Clearance	CN
	Number of Rows	1
	Bearing Type	Needle

	Alles selecteren
	Merk SKF
	Product Type Roller Bearing
	Inside Diameter 15mm
	Race Width 16mm
	Bore Type Parallel
	Roller Material Carbon Chrome Steel
	Cage Material Sheet Metal
	Maximum Speed - Oil 20000rpm
	Maximum Speed - Grease 14000rpm
	Limiting Speed 24000rpm
	Standards/Approvals No
	End Type Open
	Dynamic Load Rating 13.4kN
	Outside Diameter 27mm
	Static Load Rating 19kN
	Bearing Material Steel
	Internal Clearance CN
	Number of Rows 1
	Bearing Type Needle

SKF Roller Bearing, 15mm Inside Diameter, 27mm Outside Diameter - NKI 15/16

This roller bearing is a needle-type component designed to support radial loads in Compact rotating assemblies within automation, electronics and mechanical equipment. It incorporates machined raceways and an inner ring to provide consistent roller guidance for applications requiring high rotational capability and a Compact envelope.

Features & Benefits

• Rated dynamic load 13.4 kN for sustained radial forces
• Limiting speed 24,000 r/min enabling high-speed operation
• Static load capacity 19 kN reduces deformation under shock
• Open-end design allows straightforward lubrication access
• Sheet-metal cage offers low-friction roller retention
• Carbon-chrome steel rollers provide high wear resistance

Applications

• Suitable for high-speed motor spindle support in automation
• Ideal for Compact gearboxes in industrial electronics modules
• Used with rotary encoders requiring precise radial guidance
• Can be used for actuator shafts in electrical equipment
• Used for Compact transmission stages in mechanical assemblies

What internal clearance options are available for installation tuning?

The bearing is supplied with CN radial internal clearance, suitable where normal running clearance is required.

Which bore and outer sizes should mating components use?

The component requires a 15mm bore shaft and mates with a 27mm housing bore.

How should lubrication be approached for Peak performance?

The open end permits grease replenishment and oil circulation

maximum grease speed is 14,000 r/min and oil reference speed 20,000 r/min for planning lubrication regimes.

What material choices influence fatigue and mass for dynamic systems?

Machined rings with carbon-chrome steel rollers yield a fatigue limit of 2.28 kN and a bearing mass of 0.039kg, aiding dynamic response calculations.