SKF 32316 J2 Taper 80 mm ID Roller Bearing, 170 mm OD
- RS-stocknr.:
- 208-0072
- Fabrikantnummer:
- 32316 J2
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 386,31
(excl. BTW)
€ 467,44
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 02 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 386,31 |
*prijsindicatie
- RS-stocknr.:
- 208-0072
- Fabrikantnummer:
- 32316 J2
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 80mm | |
| Bore Type | Parallel | |
| Limiting Speed | 4000rpm | |
| Series | 2GD | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 404kN | |
| End Type | Shielded | |
| Outside Diameter | 170mm | |
| Static Load Rating | 500kN | |
| Cup Width | 48mm | |
| Cone Width | 61.5mm | |
| Number of Rows | 1 | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 80mm | ||
Bore Type Parallel | ||
Limiting Speed 4000rpm | ||
Series 2GD | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 404kN | ||
End Type Shielded | ||
Outside Diameter 170mm | ||
Static Load Rating 500kN | ||
Cup Width 48mm | ||
Cone Width 61.5mm | ||
Number of Rows 1 | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- FAG 32316-A Taper Roller 80 mm ID Roller Bearing, 170 mm OD
- FAG 32316-B Taper Roller 80 mm ID Roller Bearing, 170 mm OD
- RS PRO 32316 Taper 80 mm ID Roller Bearing, 170 mm OD
- SKF 32307 J2/Q Taper 35 mm ID Roller Bearing, 80 mm OD
- SKF 30316 Taper Roller 80 mm ID Tapered Roller Bearing, 170 mm OD
- SKF 30302 J2 Taper 15 mm ID Roller Bearing, 42 mm OD
- SKF 30222 J2 Taper 110 mm ID Roller Bearing, 200 mm OD
- SKF 32317 J2 Taper 85 mm ID Roller Bearing, 180 mm OD