SKF 32315 Taper 75 mm ID Roller Bearing, 160 mm OD
- RS-stocknr.:
- 208-0071
- Fabrikantnummer:
- 32315
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 314,62
(excl. BTW)
€ 380,69
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 19 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 314,62 |
*prijsindicatie
- RS-stocknr.:
- 208-0071
- Fabrikantnummer:
- 32315
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 75mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Cup Width | 45mm | |
| Static Load Rating | 458kN | |
| Outside Diameter | 160mm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 348kN | |
| Standards/Approvals | No | |
| Bearing Material | Steel | |
| Cone Width | 58mm | |
| Limiting Speed | 4000rpm | |
| Number of Rows | 1 | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 75mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Cup Width 45mm | ||
Static Load Rating 458kN | ||
Outside Diameter 160mm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 348kN | ||
Standards/Approvals No | ||
Bearing Material Steel | ||
Cone Width 58mm | ||
Limiting Speed 4000rpm | ||
Number of Rows 1 | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- Land van herkomst:
- PL
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- RS PRO 32315 Taper 75 mm ID Roller Bearing, 160 mm OD
- FAG 32315-B Taper Roller 75 mm ID Tapered Roller Bearing, 160 mm OD
- FAG 32315-A Taper Roller 75 mm ID Tapered Roller Bearing, 160 mm OD
- SKF 30315 Taper 75 mm ID Roller Bearing, 160 mm OD
- SKF 21315 E Taper 75 mm ID Roller Bearing, 160 mm OD
- SKF 22315 E Taper 75 mm ID Roller Bearing, 160 mm OD
- SKF 22315 EJA/VA405 Taper 75 mm ID Roller Bearing, 160 mm OD
- SKF BT1B 243150/QCL7C Taper Roller 75 mm ID Tapered Roller Bearing, 160 mm OD