SKF 32303 Taper 17 mm ID Roller Bearing, 47 mm OD
- RS-stocknr.:
- 208-0055
- Fabrikantnummer:
- 32303
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 26,11
(excl. BTW)
€ 31,59
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 05 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 26,11 |
*prijsindicatie
- RS-stocknr.:
- 208-0055
- Fabrikantnummer:
- 32303
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 17mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Bearing Material | Steel | |
| Limiting Speed | 16000rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 35.4kN | |
| End Type | Shielded | |
| Outside Diameter | 47mm | |
| Static Load Rating | 34.3kN | |
| Cone Width | 20.25mm | |
| Number of Rows | 1 | |
| Cup Width | 16mm | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 17mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Bearing Material Steel | ||
Limiting Speed 16000rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 35.4kN | ||
End Type Shielded | ||
Outside Diameter 47mm | ||
Static Load Rating 34.3kN | ||
Cone Width 20.25mm | ||
Number of Rows 1 | ||
Cup Width 16mm | ||
Race Type Tapered | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- FAG 32303-A Taper 17 mm ID Roller Bearing, 47 mm OD
- RS PRO 32303 Taper 17 mm ID Roller Bearing, 47 mm OD
- SKF 30303 Single Row Tapered Roller 17 mm ID Taper Roller Bearing, 47 mm OD
- SNR 30303A Taper Roller 17 mm ID Tapered Roller Bearing, 47 mm OD
- NTN 4T-30303 Taper Roller 17 mm ID Roller Bearing, 47 mm OD
- SKF 30203 Taper 17 mm ID Roller Bearing, 40 mm OD
- FAG 30303-A Taper 17 mm ID Roller Bearing, 47 mm OD
- SKF 32005X/Q Taper 25 mm ID Roller Bearing, 47 mm OD