SKF 31310/CL7C Cylindrical 50 mm ID Roller Bearing, 110 mm OD
- RS-stocknr.:
- 208-0007
- Fabrikantnummer:
- 31310/CL7C
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 120,05
(excl. BTW)
€ 145,26
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 1 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 120,05 |
*prijsindicatie
- RS-stocknr.:
- 208-0007
- Fabrikantnummer:
- 31310/CL7C
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 50mm | |
| Bore Type | Cylindrical | |
| Cage Material | Sheet Metal | |
| Standards/Approvals | No | |
| Series | 7FB | |
| Limiting Speed | 6000rpm | |
| Outside Diameter | 110mm | |
| Cup Width | 19mm | |
| Bearing Dynamic Load Rating | 131kN | |
| End Type | Shielded | |
| Number of Rows | 1 | |
| Cone Width | 29.25mm | |
| Static Load Rating | 120kN | |
| Bearing Type | Cylindrical | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 50mm | ||
Bore Type Cylindrical | ||
Cage Material Sheet Metal | ||
Standards/Approvals No | ||
Series 7FB | ||
Limiting Speed 6000rpm | ||
Outside Diameter 110mm | ||
Cup Width 19mm | ||
Bearing Dynamic Load Rating 131kN | ||
End Type Shielded | ||
Number of Rows 1 | ||
Cone Width 29.25mm | ||
Static Load Rating 120kN | ||
Bearing Type Cylindrical | ||
- Land van herkomst:
- DE
SKF 7FB Series Roller Bearing, 50mm Inside Diameter, 110mm Outside Diameter - 31310/CL7C
This roller bearing is designed for radial load support in rotating machinery, providing shielded protection and single-row cylindrical rolling elements for continuous operation. It is intended for use where compact, high-capacity bearings are required and where contamination control and sustained rotational speeds are factors in component selection.
Features and Benefits:
• Sheet-metal cage reduces mass while maintaining internal spacing
• Shielded ends limit ingress for extended service intervals
• High static capacity of 120 kN supports heavy stationary loads
• Dynamic rating of 131 kN sustains repeated operational forces
• Limiting speed of 6,000 r/min enables higher rotational applications
• Single-row configuration simplifies axial alignment requirements
• Shielded ends limit ingress for extended service intervals
• High static capacity of 120 kN supports heavy stationary loads
• Dynamic rating of 131 kN sustains repeated operational forces
• Limiting speed of 6,000 r/min enables higher rotational applications
• Single-row configuration simplifies axial alignment requirements
Applications
• Suitable for industrial gearboxes requiring Compact bearings
• Ideal for conveyor rollers with moderate contamination risk
• Used with electric motor drives operating at elevated speeds
• Can be used for pump shafts under radial loading
• Appropriate for machine-tool spindles with single-row needs
• Ideal for conveyor rollers with moderate contamination risk
• Used with electric motor drives operating at elevated speeds
• Can be used for pump shafts under radial loading
• Appropriate for machine-tool spindles with single-row needs
What bore diameter should the housing accommodate?
The internal bore measures 50 mm so the housing journal must match that dimension.
How does the shielding affect maintenance intervals?
Shields reduce particulate ingress which typically extends lubrication intervals compared with open designs.
Which component governs axial location in assemblies?
The single-row cylindrical design relies on shaft shoulders or external retainers to control axial positioning.
What material is used for the internal cage and how does it influence behaviour?
The cage is fabricated from sheet metal which provides dimensional stability while keeping centrifugal growth low.
What are the axial envelope measurements to consider during assembly?
The assembly requires allowance for a cone width of 29.25 mm and a cup width of 19 mm when fitting adjacent components.
Gerelateerde Links
- FAG 31310-A Taper 50 mm ID Roller Bearing, 110 mm OD
- SKF HM 803146/2/110/2/CL7C Taper 41.28 mm ID Imperial Roller Bearing, 88.9 mm OD
- SKF HM 803149/2/110/2/CL7C Taper 44.45 mm ID Imperial Roller Bearing, 88.9 mm OD
- SKF T7FC 065/CL7C Taper Roller 65 mm ID Roller Bearing, 130 mm OD
- SKF T7FC 055/CL7C Taper Roller 55 mm ID Roller Bearing, 115 mm OD
- SKF 32012 X/CL7C Taper 60 mm ID Roller Bearing, 95 mm OD
- SKF 32310 Taper 50 mm ID Roller Bearing, 110 mm OD
- SKF 32212 Taper 60 mm ID Roller Bearing, 110 mm OD