Better World
INA N208-E-XL-TVP2 40 mm ID Roller Bearing, 80 mm OD
- RS-stocknr.:
- 194-7262
- Fabrikantnummer:
- N208-E-XL-TVP2
- Fabrikant:
- INA
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 110,82
(excl. BTW)
€ 134,09
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 11 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 110,82 |
| 5 - 9 | € 106,37 |
| 10 - 24 | € 104,16 |
| 25 + | € 101,94 |
*prijsindicatie
Better World
Ons Better World assortiment bevat producten die het u gemakkelijk maken om een groenere productkeuze te maken waarop u kunt vertrouwen. Klik hier voor meer informatie.
- RS-stocknr.:
- 194-7262
- Fabrikantnummer:
- N208-E-XL-TVP2
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 40mm | |
| Race Width | 18mm | |
| Bore Type | Parallel | |
| Static Load Rating | 53kN | |
| Better World Product | Yes | |
| Outside Diameter | 80mm | |
| Standards/Approvals | No | |
| End Type | Open | |
| Dynamic Load Rating | 63kN | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 40mm | ||
Race Width 18mm | ||
Bore Type Parallel | ||
Static Load Rating 53kN | ||
Better World Product Yes | ||
Outside Diameter 80mm | ||
Standards/Approvals No | ||
End Type Open | ||
Dynamic Load Rating 63kN | ||
Better World Claim Extended Product Life, Saves Energy | ||
Single row cylindrical roller bearings with cage are suitable where:
Bearing arrangements are subjected to very high radial loads
Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
Bearing arrangements must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
The bearings should be separable (one bearing ring can be removed) for easier mounting
Gerelateerde Links
- INA N208-E-XL-TVP2-C3 40 mm ID Roller Bearing, 80 mm OD
- INA NJ307-E-XL-TVP2 35 mm ID Roller Bearing, 80 mm OD
- INA NJ308-E-XL-TVP2 40 mm ID Roller Bearing, 90 mm OD
- INA NJ309-E-XL-TVP2 45 mm ID Roller Bearing, 100 mm OD
- INA N204-E-XL-TVP2 20 mm ID Roller Bearing, 47 mm OD
- INA NJ210-E-XL-TVP2 50 mm ID Roller Bearing, 90 mm OD
- INA NJ211-E-XL-TVP2 55 mm ID Roller Bearing, 100 mm OD
- INA NJ305-E-XL-TVP2 25 mm ID Roller Bearing, 62 mm OD