INA HK0910-B 9 mm ID Roller Bearing Drawn Cup Needle, 13 mm OD
- RS-stocknr.:
- 194-6935
- Fabrikantnummer:
- HK0910-B
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 6,40
(excl. BTW)
€ 7,74
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 13 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 6,40 |
| 5 - 9 | € 6,02 |
| 10 - 24 | € 5,88 |
| 25 + | € 5,77 |
*prijsindicatie
- RS-stocknr.:
- 194-6935
- Fabrikantnummer:
- HK0910-B
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 9mm | |
| Race Width | 10mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Standards/Approvals | No | |
| Static Load Rating | 4.65kN | |
| Outside Diameter | 13mm | |
| Dynamic Load Rating | 4.25kN | |
| End Type | Open | |
| Bearing Type | Drawn Cup Needle | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 9mm | ||
Race Width 10mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Standards/Approvals No | ||
Static Load Rating 4.65kN | ||
Outside Diameter 13mm | ||
Dynamic Load Rating 4.25kN | ||
End Type Open | ||
Bearing Type Drawn Cup Needle | ||
Are particularly suitable for Applications with a very small radial section height on account of their very low cross-sectional height
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
Gerelateerde Links
- INA HK1312-B 13 mm ID Roller Bearing Drawn Cup Needle, 19 mm OD
- INA BK0509-B 5 mm ID Roller Bearing Drawn Cup Needle, 9 mm OD
- INA HK4520-B 45 mm ID Roller Bearing Drawn Cup Needle, 52 mm OD
- INA HK0408-B 4 mm ID Roller Bearing Drawn Cup Needle, 8 mm OD
- INA HK0608-B 6 mm ID Roller Bearing Drawn Cup Needle, 10 mm OD
- INA HK0810-B 8 mm ID Roller Bearing Drawn Cup Needle, 12 mm OD
- INA HK0609-B 6 mm ID Roller Bearing Drawn Cup Needle, 10 mm OD
- INA HK3516-B 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD