Timken 33211 Taper 55 mm ID Metric Roller Bearing, 100 mm OD
- RS-stocknr.:
- 193-1041
- Fabrikantnummer:
- 33211
- Fabrikant:
- Timken
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 87,13
(excl. BTW)
€ 105,43
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 3 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 87,13 |
| 5 - 9 | € 81,99 |
| 10 - 24 | € 80,33 |
| 25 + | € 78,60 |
*prijsindicatie
- RS-stocknr.:
- 193-1041
- Fabrikantnummer:
- 33211
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 55mm | |
| Bore Type | Tapered | |
| Number of Rows | 1 | |
| Cup Width | 27mm | |
| Standards/Approvals | No | |
| Outside Diameter | 100mm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 192kN | |
| Static Load Rating | 202kN | |
| Cone Width | 35mm | |
| Limiting Speed | 6300rpm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 55mm | ||
Bore Type Tapered | ||
Number of Rows 1 | ||
Cup Width 27mm | ||
Standards/Approvals No | ||
Outside Diameter 100mm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 192kN | ||
Static Load Rating 202kN | ||
Cone Width 35mm | ||
Limiting Speed 6300rpm | ||
Bearing Type Taper | ||
- Land van herkomst:
- FR
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- Timken 32011X Taper 55 mm ID Metric Roller Bearing, 90 mm OD
- Timken 30211 Taper 55 mm ID Metric Roller Bearing, 100 mm OD
- Timken 32211 Taper 55 mm ID Metric Roller Bearing, 100 mm OD
- Timken 32006X Taper 30 mm ID Metric Roller Bearing, 55 mm OD
- SKF 33211 Taper 55 mm ID Roller Bearing, 100 mm OD
- RS PRO 33211 Taper 55 mm ID Roller Bearing, 100 mm OD
- Timken JLM506849/JLM506810 Taper 55 mm ID Roller Bearing, 90 mm OD
- Timken JM207049/JM207010 Taper 55 mm ID Roller Bearing, 95 mm OD