Timken 32008X Taper 40 mm ID Metric Roller Bearing, 68 mm OD
- RS-stocknr.:
- 193-1013
- Fabrikantnummer:
- 32008X
- Fabrikant:
- Timken
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 30,65
(excl. BTW)
€ 37,09
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 30,65 |
| 5 - 9 | € 28,85 |
| 10 - 24 | € 28,24 |
| 25 + | € 27,65 |
*prijsindicatie
- RS-stocknr.:
- 193-1013
- Fabrikantnummer:
- 32008X
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 40mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Outside Diameter | 68mm | |
| Static Load Rating | 71.6kN | |
| End Type | Open | |
| Bearing Material | Steel | |
| Cone Width | 19mm | |
| Number of Rows | 1 | |
| Cup Width | 14.5mm | |
| Bearing Dynamic Load Rating | 65.8kN | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 40mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Outside Diameter 68mm | ||
Static Load Rating 71.6kN | ||
End Type Open | ||
Bearing Material Steel | ||
Cone Width 19mm | ||
Number of Rows 1 | ||
Cup Width 14.5mm | ||
Bearing Dynamic Load Rating 65.8kN | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- NTN 4T-32008X Taper Roller 40 mm ID Needle Roller Thrust Bearing, 68 mm OD
- Timken 30203 Taper 17 mm ID Metric Roller Bearing, 40 mm OD
- Timken 30308 Taper 40 mm ID Metric Roller Bearing, 90 mm OD
- Timken 32208 Taper 40 mm ID Metric Roller Bearing, 80 mm OD
- Timken 30208 Taper 40 mm ID Metric Roller Bearing, 80 mm OD
- Timken 32009X Taper 45 mm ID Metric Roller Bearing, 75 mm OD
- Timken 33207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- Timken 32310 Taper 50 mm ID Metric Roller Bearing, 110 mm OD