RS Better World
FAG 31309-XL Taper 45 mm ID Roller Bearing, 100 mm OD
- RS-stocknr.:
- 190-8363
- Fabrikantnummer:
- 31309-XL
- Fabrikant:
- FAG
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 95,68
(excl. BTW)
€ 115,77
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 07 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 95,68 |
| 5 - 9 | € 91,83 |
| 10 - 24 | € 89,93 |
| 25 + | € 88,01 |
*prijsindicatie
Ons Better World assortiment bevat producten die het u gemakkelijk maken om een groenere productkeuze te maken waarop u kunt vertrouwen.
Klik hier voor meer informatie.
- RS-stocknr.:
- 190-8363
- Fabrikantnummer:
- 31309-XL
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 45mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 114kN | |
| End Type | Open | |
| Static Load Rating | 108kN | |
| Outside Diameter | 100mm | |
| Cone Width | 27.25mm | |
| Better World Product | Yes | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 45mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 114kN | ||
End Type Open | ||
Static Load Rating 108kN | ||
Outside Diameter 100mm | ||
Cone Width 27.25mm | ||
Better World Product Yes | ||
Better World Claim Extended Product Life, Saves Energy | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Gerelateerde Links
- FAG 32009-X-XL Taper 45 mm ID Roller Bearing, 75 mm OD
- FAG 22209-E1-XL-K-C3 Taper 45 mm ID Roller Bearing, 85 mm OD
- RS PRO 31309 Taper 44 mm ID Roller Bearing, 100 mm OD
- FAG 32948-XL Taper Roller 240 mm ID Tapered Roller Bearing, 320 mm OD
- FAG 32309-A Taper Roller 45 mm ID Roller Bearing, 100 mm OD
- FAG 30208-XL Taper 40 mm ID Roller Bearing, 80 mm OD
- FAG 30207-XL Taper 35 mm ID Roller Bearing, 72 mm OD
- FAG 32205-XL Taper 25 mm ID Roller Bearing, 52 mm OD