INA HK2520-B 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- RS-stocknr.:
- 137-1766
- Fabrikantnummer:
- HK2520-B
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 9,83
(excl. BTW)
€ 11,89
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 9 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 9,83 |
| 5 - 9 | € 9,41 |
| 10 - 24 | € 9,24 |
| 25 + | € 9,01 |
*prijsindicatie
- RS-stocknr.:
- 137-1766
- Fabrikantnummer:
- HK2520-B
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Race Width | 20mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Standards/Approvals | No | |
| End Type | Open | |
| Dynamic Load Rating | 19900N | |
| Static Load Rating | 33000N | |
| Number of Rows | 1 | |
| Outside Diameter | 32mm | |
| Maximum Speed - Oil | 10200rpm | |
| Maximum Speed - Grease | 6100rpm | |
| Limiting Speed | 10200rpm | |
| Series | HK | |
| Bearing Type | Drawn Cup Needle | |
| Race Type | Drawn Cup Needle Roller Bearing | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Race Width 20mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Standards/Approvals No | ||
End Type Open | ||
Dynamic Load Rating 19900N | ||
Static Load Rating 33000N | ||
Number of Rows 1 | ||
Outside Diameter 32mm | ||
Maximum Speed - Oil 10200rpm | ||
Maximum Speed - Grease 6100rpm | ||
Limiting Speed 10200rpm | ||
Series HK | ||
Bearing Type Drawn Cup Needle | ||
Race Type Drawn Cup Needle Roller Bearing | ||
- Land van herkomst:
- DE
Schaeffler Series HK Roller Bearing, 25mm Inside Diameter, 32mm Outside Diameter - HK2520-B
This roller bearing is a drawn cup needle roller unit designed for open-end operation, providing low-profile radial support where space is limited. It suits applications requiring a Compact single-row solution with a parallel bore and is intended for installations where high rotational capability and defined static capacity are required.
Features and Benefits:
• Drawn cup construction provides Compact radial support at minimal radial envelope
• Sheet steel cage reduces mass and controls roller spacing for smooth rotation
• Dynamic load capacity 19900N delivers sustained operational load handling
• Static load rating 33000N resists heavy standstill loads without deformation
• Grease-lubricated maximum 6100 r/min enables reliable moderate-speed performance
• Oil-lubricated maximum 10200 r/min permits higher-speed operation when oiled
• Sheet steel cage reduces mass and controls roller spacing for smooth rotation
• Dynamic load capacity 19900N delivers sustained operational load handling
• Static load rating 33000N resists heavy standstill loads without deformation
• Grease-lubricated maximum 6100 r/min enables reliable moderate-speed performance
• Oil-lubricated maximum 10200 r/min permits higher-speed operation when oiled
Applications
• Suitable for automotive transmission shafts requiring Compact support
• Ideal for industrial gearboxes with constrained radial clearance
• Used with linkage assemblies where 1-row needle support is required
• Can be used for rotating cams in limited-diameter housings
• Appropriate for conveyor drive rollers needing high static resistance
• Ideal for industrial gearboxes with constrained radial clearance
• Used with linkage assemblies where 1-row needle support is required
• Can be used for rotating cams in limited-diameter housings
• Appropriate for conveyor drive rollers needing high static resistance
What bore configuration does it use for shaft mounting?
It has a parallel bore design that accommodates cylindrical shafts without tapering.
How does the open end affect installation and maintenance?
The open end allows direct access for lubrication and Visual inspection of rollers during service.
What operational speed limits apply for different lubricants?
When grease-lubricated the upper speed is 6100 r/min and when oiled it rises to 10200 r/min.
How many rows of rollers are present and what is the impact?
It is a single-row unit, providing Compact radial support suitable for applications without axial load sharing.
What material controls roller spacing and contributes to rotational behaviour?
A sheet steel cage maintains roller separation and helps ensure consistent rotation characteristics.
Gerelateerde Links
- INA HK2520-2RS-L271 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- NTN HK2520 25 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 32 mm OD
- INA HK3220-B 32 mm ID Roller Bearing Drawn Cup Needle, 39 mm OD
- INA HK2516-B 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK2512-B 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK2526 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK3224 32 mm ID Roller Bearing Drawn Cup Needle, 39 mm OD
- INA HK1516-B 15 mm ID Roller Bearing Drawn Cup Needle, 21 mm OD