INA HK2220-B 22 mm ID Roller Bearing Drawn Cup Needle, 28 mm OD

RS-stocknr.:: 137-1760
Fabrikantnummer:: HK2220-B
Fabrikant:: INA

INA HK2220-B 22 mm ID Roller Bearing Drawn Cup Needle, 28 mm OD

Bekijk alle Roller Bearings

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 9,18

(excl. BTW)

€ 11,11

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

2 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 9,18
5 - 9	€ 8,82
10 - 24	€ 8,64
25 +	€ 8,46

*prijsindicatie

RS-stocknr.:: 137-1760
Fabrikantnummer:: HK2220-B
Fabrikant:: INA

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	INA
	Product Type	Roller Bearing
	Inside Diameter	22mm
	Race Width	20mm
	Bore Type	Parallel
	Cage Material	Sheet Steel
	End Type	Open
	Static Load Rating	29000N
	Number of Rows	1
	Outside Diameter	28mm
	Limiting Speed	11700rpm
	Dynamic Load Rating	16500N
	Maximum Speed - Oil	11700rpm
	Standards/Approvals	No
	Maximum Speed - Grease	7000rpm
	Bearing Type	Drawn Cup Needle

	Alles selecteren
	Merk INA
	Product Type Roller Bearing
	Inside Diameter 22mm
	Race Width 20mm
	Bore Type Parallel
	Cage Material Sheet Steel
	End Type Open
	Static Load Rating 29000N
	Number of Rows 1
	Outside Diameter 28mm
	Limiting Speed 11700rpm
	Dynamic Load Rating 16500N
	Maximum Speed - Oil 11700rpm
	Standards/Approvals No
	Maximum Speed - Grease 7000rpm
	Bearing Type Drawn Cup Needle

Land van herkomst:: DE

Schaeffler Roller Bearing, 20mm Race Width, 22mm Bore Diameter - HK2220-B

This roller bearing is a drawn cup needle design intended to support radial loads in confined spaces. It features a parallel bore and an open end to allow assembly onto shafts where Compact cross-sections are required. The component is designed for applications demanding a specific balance of dynamic and static capacity while operating at defined lubricated speeds.

Features and Benefits:

• 16500N dynamic capacity for sustained rotating loads
• 29000N static capacity for high standstill load resistance
• 11700r/min limiting speed for high-speed oil-lubricated operation
• 7000r/min grease compatibility to simplify maintenance schedules
• 20mm race width enables Compact axial packaging

Applications

• Suitable for Compact transmission shafts in confined housings
• Ideal for linkage and actuator pivot points with radial loads
• Used with oil lubrication systems requiring high rotational speed
• Can be used for grease-lubricated auxiliary mechanisms
• Suitable for assemblies needing a parallel bore installation

What bore and outside diameters does it accept?

It fits a 22mm internal diameter with a 28mm external diameter.

How does the open end affect installation?

The open end permits axial insertion of rollers and easier shaft assembly in restricted-access situations.

What is the race configuration and its implication?

The race is a drawn cup needle type with a 20mm race width, which provides a slim profile for radial load support.

What operating speeds are specified for different lubricants?

The component is rated to 11,700r/min with oil lubrication and 7,000r/min with grease.