- RS-stocknr.:
- 514-142
- Fabrikantnummer:
- HK 4012
- Fabrikant:
- SKF
1 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 12,73
(excl. BTW)
€ 15,40
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 12,73 |
5 - 9 | € 12,23 |
10 - 24 | € 11,98 |
25 + | € 11,72 |
- RS-stocknr.:
- 514-142
- Fabrikantnummer:
- HK 4012
- Fabrikant:
- SKF
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
Specificaties
Kenmerk | Waarde |
---|---|
Inside Diameter | 40mm |
Outside Diameter | 47mm |
Roller Bearing Type | Needle |
Race Width | 12mm |
Bore Type | Parallel |
Material | Metal |
Static Load Rating | 24.5kN |
Cage Material | Sheet Steel |
Number of Rows | 1 |
Dynamic Load Rating | 13.4kN |
End Type | Open |
Fatigue Limit Load | 2.8kN |
Maximum Speed - Oil | 7000rpm |
Maximum Speed - Grease | 5000rpm |