Igus M10 Female Igumid G Rod End, 10 mm Bore Metric
- RS-stocknr.:
- 712-4989
- Fabrikantnummer:
- EBRM-10
- Fabrikant:
- Igus
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 9,70
(excl. BTW)
€ 11,74
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 55 stuk(s) vanaf 02 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 9,70 |
| 5 - 9 | € 9,31 |
| 10 + | € 9,11 |
*prijsindicatie
- RS-stocknr.:
- 712-4989
- Fabrikantnummer:
- EBRM-10
- Fabrikant:
- Igus
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Igus | |
| Connection Size | M10 Female | |
| Product Type | Rod End | |
| Bore Size | 10 mm | |
| Material | Igumid G | |
| Static Load Rating | 1150N | |
| Thread Standard | Metric | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | 80°C | |
| Standards/Approvals | No | |
| Overall Width | 57.5mm | |
| Alles selecteren | ||
|---|---|---|
Merk Igus | ||
Connection Size M10 Female | ||
Product Type Rod End | ||
Bore Size 10 mm | ||
Material Igumid G | ||
Static Load Rating 1150N | ||
Thread Standard Metric | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature 80°C | ||
Standards/Approvals No | ||
Overall Width 57.5mm | ||
- Land van herkomst:
- DE
Miniature Rod End, Female Thread, Series E
Can be combined with Igus clevis joint to make an all plastic joint
Rod End & Spherical - Maintenance Free IGUS®
IGUBAL® spherical bearings are self-lubricating, designed to run dry and are maintenance free
The bearings are extremely tolerant to dirt and dust - IGUBAL® can be used in abrasive environments
8 to 20mm bore size
Low weight (20% of equivalent steel)
High rigidity
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30°C to +80°C
Note
IGUBAL bearings are designed to run with clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.
Gerelateerde Links
- Igus M10 Male Igumid G Rod End Metric, 10 mm Bore
- Igus M10 Female Igumid G Rod End, 10 mm Bore Metric
- Igus M8 Female Igumid G Rod End, 8 mm Bore Metric
- Igus M5 Female Igumid G Rod End, 5 mm Bore Metric
- Igus M6 Female Igumid G Rod End, 6 mm Bore Metric
- Igus M10 x 1.25 Female Igumid G Rod End, 10 mm Bore Metric
- Igus M10 x 1.5 Female Igumid G Rod End, 10 mm Bore Metric
- Igus M10 x 1.5 Male Igumid G Rod End Metric, 10 mm Bore