STMicroelectronics ST25R3918-AQWT Transceiver ASK 848 MHz 5.5V
- RS-stocknr.:
- 228-3021P
- Fabrikantnummer:
- ST25R3918-AQWT
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 20 eenheden (geleverd op een doorlopende strip)*
€ 70,80
(excl. BTW)
€ 85,60
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 23 maart 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 20 - 98 | € 3,54 |
| 100 - 198 | € 3,43 |
| 200 + | € 2,97 |
*prijsindicatie
- RS-stocknr.:
- 228-3021P
- Fabrikantnummer:
- ST25R3918-AQWT
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Transceiver | |
| Component Type | Writer, Reader | |
| Sub Type | Transceiver | |
| Modulation Technique | ASK | |
| Maximum RF Data Rate | 10Mbps | |
| Mount Type | Surface | |
| Frequency | 848MHz | |
| Minimum Supply Voltage | 5.5V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 105°C | |
| Width | 5mm | |
| Standards/Approvals | No | |
| Length | 5mm | |
| Height | 900μm | |
| Series | ST25R3918 | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Transceiver | ||
Component Type Writer, Reader | ||
Sub Type Transceiver | ||
Modulation Technique ASK | ||
Maximum RF Data Rate 10Mbps | ||
Mount Type Surface | ||
Frequency 848MHz | ||
Minimum Supply Voltage 5.5V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 105°C | ||
Width 5mm | ||
Standards/Approvals No | ||
Length 5mm | ||
Height 900μm | ||
Series ST25R3918 | ||
The STMicroelectronics ST25R3918 is a multipurpose NFC transceiver supporting NFC reader, passive peer to peer functionality and NFC card emulation mode. This IC is optimized for IOT and other consumer or industrial applications where excellent analog performance is required. The ST25R3918 is also optimized to achieve good read ranges with low output power, even under noisy and harsh environments, using noise reduction receiver technology.
Dynamic power output (DPO) controls the
field strength to stay within given limits
Active wave shaping (AWS) reduces overand
under-shoots
Noise suppression receiver (NSR) allows
reception in noisy environment
Automatic gain control and squelch feature
to maximize SNR
Low power inductive card detection
Low power NFC passive target modes
Adjustable ASK modulation depth, from 5
to 40%
Integrated regulators to boost system
PSRR
Gerelateerde Links
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Festo Natural Round Plastic Tube x 4mm OD x 2.6mm ID x 1.4mm
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts