Melexis RFID Module ASK 150 kHz 5.5 V
- RS-stocknr.:
- 194-2926
- Fabrikantnummer:
- MLX90109EDC-AAA-000-TU
- Fabrikant:
- Melexis
Subtotaal (1 verpakking van 2 eenheden)*
€ 4,22
(excl. BTW)
€ 5,10
(incl. BTW)
Voeg 36 eenheden toe voor gratis bezorging
Laatste voorraad RS
- Laatste 56 stuk(s), klaar voor verzending vanaf een andere locatie
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 2 + | € 2,11 | € 4,22 |
*prijsindicatie
- RS-stocknr.:
- 194-2926
- Fabrikantnummer:
- MLX90109EDC-AAA-000-TU
- Fabrikant:
- Melexis
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Melexis | |
| Component Type | Module | |
| Sub Type | Transceiver | |
| Product Type | RFID Module | |
| Modulation Technique | ASK | |
| Mount Type | Surface | |
| Frequency | 150kHz | |
| Interface Type | 2 Wire | |
| Minimum Supply Voltage | 3.1V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 4.98mm | |
| Width | 3.99 mm | |
| Series | MLX90109 | |
| Standards/Approvals | No | |
| Height | 1.47mm | |
| Alles selecteren | ||
|---|---|---|
Merk Melexis | ||
Component Type Module | ||
Sub Type Transceiver | ||
Product Type RFID Module | ||
Modulation Technique ASK | ||
Mount Type Surface | ||
Frequency 150kHz | ||
Interface Type 2 Wire | ||
Minimum Supply Voltage 3.1V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 4.98mm | ||
Width 3.99 mm | ||
Series MLX90109 | ||
Standards/Approvals No | ||
Height 1.47mm | ||
The MLX90109 is a single chip RFID transceiver for the 125kHz frequency range. It has been conceived for minimum system cost and minimum power consumption offering all required flexibility for a state of the art AM transceiver base station.
An external coil (L) and capacitor (C) are connected as a parallel resonant circuit that determines the carrier frequency and the oscillator frequency of the reader. This eliminates zero modulation effects by perfect antenna tuning, and avoids the need for an external oscillator.
The reader IC can easily be switched to power down by setting the antenna amplitude to zero.
The MLX90109 can be configured to decode the transponder signal on-chip. In this case the decoded signal is available through a 2-wire interface with clock and data. For minimum interface wiring, the non-decoded transponder signal can also be made available on a single wire interface.
Gerelateerde Links
- Melexis MLX90109EDC-AAA-000-TU RFID Module ASK 150 kHz 5.5 V
- STMicroelectronics RFID Tag ASK 423 kHz 5.5 V
- STMicroelectronics ST25DV04KC-JF6L3 RFID Tag ASK 423 kHz 5.5 V
- onsemi RFID Module ASK 13.56 MHz 5.5 V
- onsemi N24RF04DWPT3G RFID Module ASK 13.56 MHz 5.5 V
- onsemi N24RF64EDWPT3G RFID Module ASK 13.56 MHz 5.5 V
- onsemi N24RF04DTPT3G RFID Module ASK 13.56 MHz 5.5 V
- Texas Instruments RFID Module OOK, ASK 13.56 MHz 5.5 V