Huber+Suhner 6820.17.A RF AttenuatorStraight 0.8 dBMaleFemale

RS-stocknr.:: 716-5097
Artikelnummer Distrelec:: 302-47-142
Fabrikantnummer:: 6820.17.A
Fabrikant:: Huber+Suhner

Huber+Suhner 6820.17.A RF AttenuatorStraight 0.8 dBMaleFemale

Subtotaal (1 eenheid)*

€ 219,72

(excl. BTW)

€ 265,86

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

10 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 32 stuk(s) vanaf 31 juli 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 219,72

*prijsindicatie

RS-stocknr.:: 716-5097
Artikelnummer Distrelec:: 302-47-142
Fabrikantnummer:: 6820.17.A
Fabrikant:: Huber+Suhner

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Huber+Suhner
	Interface Type	N Plug to N Socket
	Product Type	RF Attenuator
	Impedance	50Ω
	Maximum Frequency	12.4GHz
	Body Plating	Sucoplate
	Contact Plating	Gold
	Contact Material	Brass
	Low Power	Yes
	Minimum Frequency	4GHz
	Maximum Attenuation	0.8dB
	Minimum Operating Temperature	-55°C
	Orientation	Straight
	Connector Type	Type N
	Maximum Operating Temperature	130°C
	Connector Gender A	Male
	Standards/Approvals	No
	Connector Gender B	Female

	Alles selecteren
	Merk Huber+Suhner
	Interface Type N Plug to N Socket
	Product Type RF Attenuator
	Impedance 50Ω
	Maximum Frequency 12.4GHz
	Body Plating Sucoplate
	Contact Plating Gold
	Contact Material Brass
	Low Power Yes
	Minimum Frequency 4GHz
	Maximum Attenuation 0.8dB
	Minimum Operating Temperature -55°C
	Orientation Straight
	Connector Type Type N
	Maximum Operating Temperature 130°C
	Connector Gender A Male
	Standards/Approvals No
	Connector Gender B Female

RF ATTENUATOR: Type 6820.17.A Data Sheet

Land van herkomst:: CH

Huber+Suhner RF Attenuator, 0.8dB Maximum Attenuation, 12.4GHz Maximum Frequency - 6820.17.A

This RF attenuator is a low-power inline device designed to reduce signal amplitude in 50Ω systems while preserving impedance match across a wide frequency range. It connects directly between coaxial lines using a straight Type N male to Type N female Interface with gold-plated contacts, enabling insertion into test, measurement and signal-chain setups where controlled attenuation is required.

Features and Benefits:

• Maximum attenuation 0.8 dB provides minimal signal reduction for calibration
• Operates up to 12.4 GHz to support high-frequency measurements
• Temperature range -55°C to 130°C maintains performance in harsh environments
• Brass contacts with gold plating reduce contact loss and corrosion
• Sucoplate body finish increases mechanical durability of the housing

Applications

• Suitable for RF test benches and signal conditioning in laboratories
• Ideal for attenuation in communication component verification
• Used with coaxial measurement equipment requiring 50 Ω matching
• Can be used for amplitude control in automation and electronics rigs

What connector types are provided for inline connections?

The unit uses a Type N plug to Type N socket Interface allowing direct male-to-female coupling in 50 Ω coaxial lines.

How does the contact construction affect electrical performance?

Brass contacts with gold plating lower contact resistance and improve conductivity, reducing insertion loss at the connector interface.

What environmental extremes can it tolerate during operation?

It is specified to function between -55°C and 130°C, suitable for thermal cycling and elevated-temperature test conditions.

Is this suited for high-power transmission applications?

It is designated as a low-power attenuator, therefore it is not intended for high-power RF transmission duties.