Infineon RF Amplifier Low Noise 18.2 dB, 4-Pin 1615 MHz TSLP

RS-stocknr.:: 258-0651
Fabrikantnummer:: BGA123L4E6327XTSA1
Fabrikant:: Infineon

Infineon RF Amplifier Low Noise 18.2 dB, 4-Pin 1615 MHz TSLP

Subtotaal (1 rol van 15000 eenheden)*

€ 3.705,00

(excl. BTW)

€ 4.485,00

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk	Per rol*
15000 +	€ 0,247	€ 3.705,00

*prijsindicatie

RS-stocknr.:: 258-0651
Fabrikantnummer:: BGA123L4E6327XTSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Operating Frequency	1615 MHz
	Amplifier Type	Low Noise
	Product Type	RF Amplifier
	Technology	Silicon Germanium
	Gain	18.2dB
	Package Type	TSLP
	Minimum Supply Voltage	1.1V
	Pin Count	4
	Maximum Supply Voltage	3.6V
	Noise Figure	0.75dB
	P1dB - Compression Point	-17dBm
	Minimum Operating Temperature	-40°C
	Third Order Intercept OIP3	-14dBm
	Maximum Operating Temperature	85°C
	Standards/Approvals	JEDEC47/20/22
	Length	0.7mm
	Height	0.31mm
	Width	0.7 mm
	Series	BGA123L4
	Automotive Standard	No

	Alles selecteren
	Merk Infineon
	Operating Frequency 1615 MHz
	Amplifier Type Low Noise
	Product Type RF Amplifier
	Technology Silicon Germanium
	Gain 18.2dB
	Package Type TSLP
	Minimum Supply Voltage 1.1V
	Pin Count 4
	Maximum Supply Voltage 3.6V
	Noise Figure 0.75dB
	P1dB - Compression Point -17dBm
	Minimum Operating Temperature -40°C
	Third Order Intercept OIP3 -14dBm
	Maximum Operating Temperature 85°C
	Standards/Approvals JEDEC47/20/22
	Length 0.7mm
	Height 0.31mm
	Width 0.7 mm
	Series BGA123L4
	Automotive Standard No

Datasheet - BGA123L4E6327XTSA1

The Infineon small footprint ultra low current low noise amplifier is designed to enhance GNSS signal sensitivity especially in wearables and mobile cellular IoT devices.

With 18.2 dB gain and only 0.75 dB noise figure it ensures high system sensitivity. The current needed is only 1.1 mA which means just 1.3 mW power consumption, which is critical to help to conserve batteries. The wide supply voltage range of 1.1 V to 3.6 V ensures flexible design and high compatibility.

Ultra low current consumption of 1.1 mA

Wide supply voltage range of 1.1 V to 3.6 V

High insertion power gain of 18.2 dB

Low noise figure of 0.75 dB

2 kV HBM ESD protection

Infineon RF Amplifier Low Noise 18.2 dB, 4-Pin 1615 MHz TSLP

Gerelateerde Links