BGA125N6E6327XTSA1 Infineon RF Amplifier Low Noise 22.2 dB, 6-Pin 1300MHz TSNP

RS-stocknr.:: 228-6514
Fabrikantnummer:: BGA125N6E6327XTSA1
Fabrikant:: Infineon

BGA125N6E6327XTSA1 Infineon RF Amplifier Low Noise 22.2 dB, 6-Pin 1300MHz TSNP

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 verpakking van 20 eenheden)*

€ 6,44

(excl. BTW)

€ 7,80

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 25 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
20 - 180	€ 0,322	€ 6,44
200 - 480	€ 0,248	€ 4,96
500 - 980	€ 0,231	€ 4,62
1000 - 1980	€ 0,216	€ 4,32
2000 +	€ 0,199	€ 3,98

*prijsindicatie

RS-stocknr.:: 228-6514
Fabrikantnummer:: BGA125N6E6327XTSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Amplifier Type	Low Noise
	Product Type	RF Amplifier
	Technology	Infineon Patented Bipolar Technology
	Mount Type	Surface
	Gain	22.2dB
	Minimum Supply Voltage	1.1V
	Package Type	TSNP
	Maximum Supply Voltage	2.8V
	Pin Count	6
	Noise Figure	0.8dB
	Minimum Operating Temperature	-40°C
	Third Order Intercept OIP3	14dBm
	Maximum Operating Temperature	85°C
	Length	1.1mm
	Height	0.375mm
	Standards/Approvals	RoHS/WEEE
	Automotive Standard	No
	Series	BGA125N6

	Alles selecteren
	Merk Infineon
	Amplifier Type Low Noise
	Product Type RF Amplifier
	Technology Infineon Patented Bipolar Technology
	Mount Type Surface
	Gain 22.2dB
	Minimum Supply Voltage 1.1V
	Package Type TSNP
	Maximum Supply Voltage 2.8V
	Pin Count 6
	Noise Figure 0.8dB
	Minimum Operating Temperature -40°C
	Third Order Intercept OIP3 14dBm
	Maximum Operating Temperature 85°C
	Length 1.1mm
	Height 0.375mm
	Standards/Approvals RoHS/WEEE
	Automotive Standard No
	Series BGA125N6

Datasheet-BGA125N6E6327XTSA1

Infineon BGA125N6 Series RF Amplifier, 22.2dB Gain, 0.8dB Noise Figure - BGA125N6E6327XTSA1

This RF amplifier is a Compact low-noise amplifying device designed for small-footprint surface-mount applications operating around 1300 MHz. It provides signal amplification with low noise contribution and supports low-voltage supply environments, making it appropriate for systems where board space and power headroom are constrained.

Features and Benefits:

• 22.2 dB gain improves weak signal levels for downstream processing
• 0.8 dB noise figure preserves signal-to-noise ratio in receivers
• 14 dBm OIP3 maintains linearity under moderate input drive
• 1.1-2.8 V supply range enables low-voltage system integration
• Infineon-patented bipolar topology delivers predictable RF behaviour
• Surface-mount TSNP package supports automated assembly

Applications

• Suitable for front-end amplification in 1300 MHz receiver chains
• Ideal for low-power wireless infrastructure modules
• Used with tuning networks in Compact RF modules
• Can be used for signal boost in test and measurement fixtures
• Applicable in battery-powered RF sensor nodes

What thermal limits should be considered during layout?

The device operates up to a maximum temperature of 85 °C, so thermal vias and adequate copper should be provided to manage dissipation.

What supply pinning flexibility exists for low-voltage designs?

It accepts supply voltages down to 1.1 V, allowing use with single-cell regulator rails common in portable systems.

How many package connections are available for PCB routing?

The component uses a 6-pin layout which permits separate RF, bias and ground routing for optimised performance.

What frequency performance can I expect for narrowband designs?

It is specified for operation at 1300 MHz, providing intended gain and noise characteristics at that frequency.

Are automotive standards applicable for use in vehicle systems?

It is not qualified to automotive standards and should not be assumed to meet vehicle-specific requirements.