DesignSpark, Camera Module, CSI-2 with 1920 x 1080 pixels Resolution

Bekijk alle Raspberry Pi Cameras
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
RS-stocknr.:
184-3079
Fabrikantnummer:
RP-VC1
Fabrikant:
DesignSpark
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

DesignSpark

Type

Camera Module

Supported Video Ports

Raspberry Pi

Number of Channels

1

Supported Bus Interfaces

CSI-2

Maximum Supported Resolution

1920 x 1080 pixels

Maximum Frame Rate Capture

30fps

Dimensions

35 x 22 x 21.7mm

Height

21.7mm

Length

35mm

Maximum Operating Temperature

+60 °C

Minimum Operating Temperature

-20 °C

Width

22mm

Land van herkomst:
JP

DesignSpark Camera Module


The DesignSpark camera module by Entaniya enables the use of M12 mount lenses with your Raspberry Pi. The lens is optimised for daylight use with the inclusion of an Infra-Red (IR) filter within the lens. This module is supplied pre-assembled with a Raspberry Pi v2 camera, M12 mount and 220° fish-eye lens. This camera has interchangeable lenses and there is a possibility that dust may adhere to the sensor. Therefore, it is recommended to blow off the dust regularly.

Features and Benefits


Image resolution is 3280 pixel x 2464 pixel
Video resolution is 1920 pixel x 1080 pixel
Sony IMX219PQ sensor
8 megapixel fixed focus
RP-220 lens

Applications


Automation
Robotics
Embedded development

Certifications


ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007