ROHM BM2P181S-Z, PWM Controller, 650 V, 65 7-Pin, DIP7K

Bekijk alle PWM
Bulkkorting beschikbaar

Subtotaal (1 verpakking van 5 eenheden)*

€ 8,83

(excl. BTW)

€ 10,685

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 25 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
5 - 45€ 1,766€ 8,83
50 - 95€ 1,676€ 8,38
100 - 495€ 1,552€ 7,76
500 - 995€ 1,428€ 7,14
1000 +€ 1,378€ 6,89

*prijsindicatie

RS-stocknr.:
264-747
Fabrikantnummer:
BM2P181S-Z
Fabrikant:
ROHM
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

ROHM

Maximum Switching Frequency

65

Start-up Supply Current

500µA

Package Type

DIP7K

Pin Count

7

Maximum Operating Supply Voltage

650 V

The ROHM Non-isolated PWM type DC or DC converter for AC or DC provides an optimum system for all products that include an electrical outlet. It enables simpler design of a high effective converter specializing in non-isolation. By a built-in startup circuit that tolerates 650V, this IC contributes to low power consumption. A current detection resistor as internal device realizes the small power supply designs. Since a current mode control is utilized, the current can be restricted in each cycle and an excellent performance is demonstrated in the bandwidth and transient response. The switching frequency is fixed to 25kHz. A frequency hopping function is also on chip, and it contributes to low EMI. In addition, a built-in super junction MOSFET which tolerates 650V makes the design easy.

PWM current mode method
Frequency hopping function
Burst operation at light load
Built-in 650V startup circuit
Built-in 650V super junction MOSFET
VCC UVLO under voltage lockout
VCC OVP over voltage protection
Over current detection function per cycle
Soft start function

Gerelateerde Links