SICK Inductive Threaded Barrel Proximity Sensor, M5, 1 mm Detection, PNP NO, 10 → 30 V dc

RS-stocknr.:: 266-8594
Fabrikantnummer:: IMP05-01BPSVU2S
Fabrikant:: SICK

SICK Inductive Threaded Barrel Proximity Sensor, M5, 1 mm Detection, PNP NO, 10 → 30 V dc

Subtotaal (1 eenheid)*

€ 325,57

(excl. BTW)

€ 393,94

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Tijdelijk niet op voorraad

Verzending vanaf 02 februari 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 325,57

*prijsindicatie

RS-stocknr.:: 266-8594
Fabrikantnummer:: IMP05-01BPSVU2S
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Thread Size	M5
	Sensor Technology	Inductive
	Detection Range	1 mm
	Body Style	Threaded Barrel
	Digital Switching Output Type	PNP
	Output Function	NO
	Connection Type	Pre-Cabled
	Cable Length	2m
	Supply Voltage	10 → 30 V dc
	IP Rating	IP68
	Length	27mm
	Mounting Type	Flush
	Width	5mm
	Housing Material	Phynox
	Maximum DC Voltage	30V
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	+70°C
	Standards Met	CE, EAC
	Short Circuit Overload Protection	Yes
	Maximum Switching Frequency	4.8kHz
	Switching Frequency	4.8 kHz
	Reverse Polarity Protection	Yes
	Switching Current	200 mA
	Series	IMP
	Shielding	Shielded

	Alles selecteren
	Merk SICK
	Thread Size M5
	Sensor Technology Inductive
	Detection Range 1 mm
	Body Style Threaded Barrel
	Digital Switching Output Type PNP
	Output Function NO
	Connection Type Pre-Cabled
	Cable Length 2m
	Supply Voltage 10 → 30 V dc
	IP Rating IP68
	Length 27mm
	Mounting Type Flush
	Width 5mm
	Housing Material Phynox
	Maximum DC Voltage 30V
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature +70°C
	Standards Met CE, EAC
	Short Circuit Overload Protection Yes
	Maximum Switching Frequency 4.8kHz
	Switching Frequency 4.8 kHz
	Reverse Polarity Protection Yes
	Switching Current 200 mA
	Series IMP
	Shielding Shielded

Datasheet - IMP05-01BPSVU2S

Land van herkomst:: LK

Overview

The inductive, high-pressure-resistant IMP sensors are perfectly suited for the query of end positions in hydraulic cylinders. The use of state-of-the-art ASIC and manufacturing technologies from SICK sets new standards in installation size, service life and load capability for the sensors. Due to the stable stainless steel housing and an active high-performance ceramic surface, they are pressure-resistant up to 500 bar.

Above-average system throughput is a matter of course for the range of models M5, M8, M12 andM14 thanks to 1 million tested pressure cycles.

At a glance

Types: M5, M8, M12 and M14
Extended sensing ranges: 1 mm to 3 mm
Electrical configuration: DC 3- and 4-wire
Enclosure rating: IP 68
Temperature range: –25 °C to +100 °C
Stainless steel housing with active surface made from stable high-performance ceramic
Pressure resistant up to 500 bar, gas-tight front
Expected service life of up to 1 million pressure cycles

Your Benefit

Reduced maintenance costs
Extremely resilient and durable
Up to 50 times longer service life compared to conventional sensors under pressure cycles
Simple compensation of cylinder tolerances
Simple integration due to small design
Controlled piston deceleration
Increased piston service life due to collision prevention at the end of the work cycle

Applications

End position detection of a piston stroke in hydraulic cylinders