Telemecanique Sensors Inductive Block Proximity Sensor, 15 mm Detection 4-20 mA, 24 V dc
- RS-stocknr.:
- 221-1734
- Artikelnummer Distrelec:
- 303-04-362
- Fabrikantnummer:
- XS9C111A2L2
- Fabrikant:
- Telemecanique Sensors
Subtotaal (1 eenheid)*
€ 141,60
(excl. BTW)
€ 171,34
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending 2 stuk(s) vanaf 10 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 141,60 |
*prijsindicatie
- RS-stocknr.:
- 221-1734
- Artikelnummer Distrelec:
- 303-04-362
- Fabrikantnummer:
- XS9C111A2L2
- Fabrikant:
- Telemecanique Sensors
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Telemecanique Sensors | |
| Sensor Technology | Inductive | |
| Detection Range | 15 mm | |
| Body Style | Block | |
| Analogue Switching Output Type | 4-20 mA | |
| Cable Length | 2m | |
| Connection Type | Pre-Cabled | |
| Supply Voltage | 24 V dc | |
| Length | 15mm | |
| IP Rating | IP68 | |
| Mounting Type | Flush | |
| Maximum DC Voltage | 24V | |
| Minimum Operating Temperature | -25°C | |
| Maximum Switching Frequency | 1kHz | |
| Series | XS | |
| Depth | 15mm | |
| Switching Frequency | 1 kHz | |
| Maximum Operating Temperature | +70°C | |
| Alles selecteren | ||
|---|---|---|
Merk Telemecanique Sensors | ||
Sensor Technology Inductive | ||
Detection Range 15 mm | ||
Body Style Block | ||
Analogue Switching Output Type 4-20 mA | ||
Cable Length 2m | ||
Connection Type Pre-Cabled | ||
Supply Voltage 24 V dc | ||
Length 15mm | ||
IP Rating IP68 | ||
Mounting Type Flush | ||
Maximum DC Voltage 24V | ||
Minimum Operating Temperature -25°C | ||
Maximum Switching Frequency 1kHz | ||
Series XS | ||
Depth 15mm | ||
Switching Frequency 1 kHz | ||
Maximum Operating Temperature +70°C | ||
- Land van herkomst:
- FR
The Schneider Electric XS series inductive proximity sensor is solely for the detection of metal objects. It basically comprises an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metal object is placed within the magnetic field generated by the sensor, the resulting currents induced form an additional load and the oscillations cease. This causes the output driver to operate and, depending on the sensor type, a normally open (NO) or normally closed (NC) output signal is produced.
Body type Fixed
Detector flush mounting
acceptance
Flush mountable
Material Plastic
Enclosure material PBT
Type of output signal Analogue
Wiring technique 2-wire
[Sn] nominal sensing
distance
15 mm
Output circuit type DC
Analogue output range 4...20 mA
Electrical connection Cable
Cable length 2 m
Detector flush mounting
acceptance
Flush mountable
Material Plastic
Enclosure material PBT
Type of output signal Analogue
Wiring technique 2-wire
[Sn] nominal sensing
distance
15 mm
Output circuit type DC
Analogue output range 4...20 mA
Electrical connection Cable
Cable length 2 m
Gerelateerde Links
- Telemecanique Sensors Inductive Block Proximity Sensor, 40 mm Detection 4-20 mA, 24 V dc
- Telemecanique Sensors Inductive Block Proximity Sensor, 15 mm Detection 0-10 V, 24 V dc
- Telemecanique Sensors Inductive Block Proximity Sensor, 15 mm Detection, PNP NO, 12 → 24 V dc
- Telemecanique Sensors Inductive Block Proximity Sensor, 15 mm Detection, PNP NC, 12 → 24 V dc
- Telemecanique Sensors Inductive Flat Proximity Sensor, 15 mm Detection, PNP NC, 12 → 24 V dc
- Telemecanique Sensors Inductive Flat Proximity Sensor, 15 mm Detection, PNP NO, 12 → 24 V dc
- Telemecanique Sensors Inductive Flat Proximity Sensor, 15 mm Detection, PNP NC, 24 → 240 V dc
- Telemecanique Sensors Inductive Block Proximity Sensor, 25 mm Detection 4-20 mA, 12 → 24 V dc