Eurotherm EPack DIN Rail Controller Voltage 500V ac/dc Open-Loop Control with Feedforward+Trim, Threshold Limit Control
- RS-stocknr.:
- 790-3612
- Fabrikantnummer:
- EPACK-1PH/63A/24V/XXX/V2
- Fabrikant:
- Eurotherm
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 836,69
(excl. BTW)
€ 1.012,39
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
- Klaar voor verzending vanaf 01 juni 2026
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 836,69 |
*prijsindicatie
- RS-stocknr.:
- 790-3612
- Fabrikantnummer:
- EPACK-1PH/63A/24V/XXX/V2
- Fabrikant:
- Eurotherm
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Eurotherm | |
| Output Type | Voltage | |
| Product Type | Controller | |
| Maximum Current | 63A | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 45°C | |
| Control Type | Open-Loop Control with Feedforward+Trim, Threshold Limit Control (Pa Reduction), I² Control, V² Control, True Power Control, Proportional Limit Control (by transfer V²↔I² or P↔I²) | |
| Terminal Type | Plug | |
| Maximum Supply Voltage | 500V ac/dc | |
| Energy measurement | Yes | |
| Diagnostics | Comms Network Fault, Open Thyristor Detection, Partial Load Failure, Over Current, Under/Over Voltage, Chop Off, Short Circuit Thyristor Detection | |
| Digital Comms | Ethernet Dual Port/Modbus TCP | |
| Auxiliary Power Supply | 100 to 500 V | |
| Firing Mode | Intelligent Half Cycle, Fixed Burst Firing, Phase Angle, Variable Burst Firing | |
| Maximum Voltage | 500V | |
| Display Type | 1.5 in TFT Colour | |
| IP Rating | IP10, IP20 | |
| Width | 121mm | |
| Length | 48mm | |
| Standards/Approvals | CE, GOST-R, UL, CCC, IEC 60947-4-3, cUL | |
| Series | EPack | |
| Mount Type | DIN Rail | |
| Input Type | 4 to 20 mA, Digital Input, 0 to 10 V, 2 to 10 V, 0 to 20 mA, One Configurable Analogue Input 0 to 5 V, Contact | |
| Panel Depth | 136.2mm | |
| Alles selecteren | ||
|---|---|---|
Merk Eurotherm | ||
Output Type Voltage | ||
Product Type Controller | ||
Maximum Current 63A | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 45°C | ||
Control Type Open-Loop Control with Feedforward+Trim, Threshold Limit Control (Pa Reduction), I² Control, V² Control, True Power Control, Proportional Limit Control (by transfer V²↔I² or P↔I²) | ||
Terminal Type Plug | ||
Maximum Supply Voltage 500V ac/dc | ||
Energy measurement Yes | ||
Diagnostics Comms Network Fault, Open Thyristor Detection, Partial Load Failure, Over Current, Under/Over Voltage, Chop Off, Short Circuit Thyristor Detection | ||
Digital Comms Ethernet Dual Port/Modbus TCP | ||
Auxiliary Power Supply 100 to 500 V | ||
Firing Mode Intelligent Half Cycle, Fixed Burst Firing, Phase Angle, Variable Burst Firing | ||
Maximum Voltage 500V | ||
Display Type 1.5 in TFT Colour | ||
IP Rating IP10, IP20 | ||
Width 121mm | ||
Length 48mm | ||
Standards/Approvals CE, GOST-R, UL, CCC, IEC 60947-4-3, cUL | ||
Series EPack | ||
Mount Type DIN Rail | ||
Input Type 4 to 20 mA, Digital Input, 0 to 10 V, 2 to 10 V, 0 to 20 mA, One Configurable Analogue Input 0 to 5 V, Contact | ||
Panel Depth 136.2mm | ||
Niet conform
- Land van herkomst:
- PL
EPack - Compact SCR Power Controller
Gerelateerde Links
- Eurotherm EPack DIN Rail Controller 2 Input, 1 Output Analogue 500V ac I² Control, True Power Control, Threshold Limit
- Eurotherm EPack DIN Rail Controller, 1 Output 1 NE, De-Energised On Alarm Relay, Alarm Relay 500V ac/dc Threshold Limit
- Eurotherm EPACK-3PH DIN Rail Power Controller Relay 500V I² Control, Current Limitation Control (V²-I² or P-I²
- Eurotherm EPACK-3PH DIN Rail Controller Relay 500V Power Controller
- Eurotherm EPACK-3PH DIN Rail Controller Relay 500V 3 Phase
- Eurotherm EPACK-3PH DIN Rail Power Controller Relay 500V Power Controller
- Eurotherm EPACK-2PH DIN Rail Power Controller Relay 500V Power Controller
- Eurotherm EPACK-3PH DIN Rail Power Controller Relay 500V 3 Phase